Reply

Connecting GS752TPP and GS728TPv2

mtuma5672
Initiate

Connecting GS752TPP and GS728TPv2

I have the switches connected through ports 48 and  23 respectively.  The new switch  (GS728TPv2) initially had a DHCP address.  I configured the switch for  a static address.  I configured the VLANs for  each port on both switches.  I am not getting any traffic between the two (not even ping). What am I missing? 

Message 1 of 3

Accepted Solutions
mtuma5672
Initiate

Re: Connecting GS752TPP and GS728TPv2

DaneA,

I figured out what the issue was. I needed to tag ALL of the VLANs on the trunk ports.

 

Thanks,

Mike

View solution in original post

Message 3 of 3

All Replies
DaneA
NETGEAR Moderator

Re: Connecting GS752TPP and GS728TPv2

@mtuma5672,

 

Welcome to the community! 🙂

 

It would be best if you post a diagram of your detailed network setup.  

 

Let me share the article below and use it as your guide:

 

How do I setup a VLAN trunk link between two NETGEAR switches?

 

 

Regards,

 

DaneA

NETGEAR Community Team

Message 2 of 3
mtuma5672
Initiate

Re: Connecting GS752TPP and GS728TPv2

DaneA,

I figured out what the issue was. I needed to tag ALL of the VLANs on the trunk ports.

 

Thanks,

Mike

Message 3 of 3
Top Contributors
Discussion stats
  • 2 replies
  • 628 views
  • 1 kudo
  • 2 in conversation
Announcements