Retrieve MAC address list on GS728TP

[xgonc]

Hi,

Is there away, without using the webgui to retrieve the MAC addresses of the devices, that are connected to each of the ports?

Thanks.

[schumaku · Accepted solution]

Easy, that's higher SNMP math 8-) ... start around .1.3.6.1.2.1.17.7.1.2.2.1.3 or iso.3.6.1.2.1.17.7.1.2.2.1.3 ...

Example:

Name/OID: .1.3.6.1.2.1.17.7.1.2.2.1.3.250.40.128.136.249.74.25; Value (Integer): 3

Value == port
250 == VLAN ID
40.128.136.249.74.25 == MAC address in DEC ... so in HEX 28-80-88-F9-4A-19 if the old cells did it right

Happy Holidays!

Regards,

-Kurt

[schumaku]

Of course by SNMP. The SNMP MIB are readily available along with the firmware on the GS728TPv2 downloads.

[xgonc]

@schumaku 

Thanks for the update. I've got through the MIB tables, and I don't find anything that suits my need. Can you pin point to me?

Thanks.

[schumaku · Accepted solution]

Easy, that's higher SNMP math 8-) ... start around .1.3.6.1.2.1.17.7.1.2.2.1.3 or iso.3.6.1.2.1.17.7.1.2.2.1.3 ...

Example:

Name/OID: .1.3.6.1.2.1.17.7.1.2.2.1.3.250.40.128.136.249.74.25; Value (Integer): 3

Value == port
250 == VLAN ID
40.128.136.249.74.25 == MAC address in DEC ... so in HEX 28-80-88-F9-4A-19 if the old cells did it right

Happy Holidays!

Regards,

-Kurt