× NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Orbi WiFi 7 RBE973
Reply

Web interface keeps showing Load Firmware page

HansLinux
Follower

Web interface keeps showing Load Firmware page

Web interface keeps showing Load Firmware page on my switch.

Powering off and on, factory reset does NOT help.

Howto get back to the web interface home page?

Model: GS108Ev3|ProSafe 8 ports Gigabit Plus switch
Message 1 of 2

Accepted Solutions
schumaku
Guru

Re: Web interface keeps showing Load Firmware page

This does read like the fall-back if the firmware image uploaded is not workable why ever.

 

Double check you are using the correct firmware image - and your switch is a GS108Ev3 (wild guess, label might say GS108E-300)

 

The GS108Ev3 download does currently show GS108Ev3 Firmware Version 2.06.03 as current. Download the correct language version .zip file, unpack using a reliable unzip to get GS108Ev3_V2.06.03EN.bin - upload just the .bin file from a different computer, different browser, ... - to easy something is blocked or corrupt.

View solution in original post

Message 2 of 2

All Replies
schumaku
Guru

Re: Web interface keeps showing Load Firmware page

This does read like the fall-back if the firmware image uploaded is not workable why ever.

 

Double check you are using the correct firmware image - and your switch is a GS108Ev3 (wild guess, label might say GS108E-300)

 

The GS108Ev3 download does currently show GS108Ev3 Firmware Version 2.06.03 as current. Download the correct language version .zip file, unpack using a reliable unzip to get GS108Ev3_V2.06.03EN.bin - upload just the .bin file from a different computer, different browser, ... - to easy something is blocked or corrupt.

Message 2 of 2
Top Contributors
Discussion stats
  • 1 reply
  • 801 views
  • 0 kudos
  • 2 in conversation
Announcements