Web interface keeps showing Load Firmware page

[HansLinux]

Web interface keeps showing Load Firmware page on my switch.

Powering off and on, factory reset does NOT help.

Howto get back to the web interface home page?

[schumaku · Accepted solution]

This does read like the fall-back if the firmware image uploaded is not workable why ever.

Double check you are using the correct firmware image - and your switch is a GS108Ev3 (wild guess, label might say GS108E-300)

The GS108Ev3 download does currently show GS108Ev3 Firmware Version 2.06.03 as current. Download the correct language version .zip file, unpack using a reliable unzip to get GS108Ev3_V2.06.03EN.bin - upload just the .bin file from a different computer, different browser, ... - to easy something is blocked or corrupt.

[schumaku · Accepted solution]

This does read like the fall-back if the firmware image uploaded is not workable why ever.

Double check you are using the correct firmware image - and your switch is a GS108Ev3 (wild guess, label might say GS108E-300)

The GS108Ev3 download does currently show GS108Ev3 Firmware Version 2.06.03 as current. Download the correct language version .zip file, unpack using a reliable unzip to get GS108Ev3_V2.06.03EN.bin - upload just the .bin file from a different computer, different browser, ... - to easy something is blocked or corrupt.