lacp mit JGS524Ev2 und Synology DS1515+

[Englerch]

Hallo,

ich möchte meine Synology DS1515+ an allen 4 Ports mit dynamic link aggregation an meinen JGS524Ev2 anschließen.

Kann der Switch überhaupt IEEE-802.3ad LACP oder nur IEEE-802.3ad Entwurf 1?

Ich bekomme (nach Umstellen auf LAG im Switch) keine Verbindung mehr zur Synology. IP ist festgenagelt und auch das Gateway stimmt.

DIe Synology kann zwar ein Bond ersellen, aber bringt keine IEEE-802.3ad-Verbindung zu Stande.

Was ist da faul?

Hat jemand einen Tip?

VlG
Chrissly

[JohnRo · Accepted solution]

Hello Englerch, 

Sorry for that, I have to take that back. There is no LACP for JGS524Ev2, I apologize for this. The JGS524Ev2 is only a ProSafe Plus model, the manual I have posted belongs to a Smart Managed switch (GS108Tv2 and GS110TP).

Thanks, 

[Englerch]

DOS JGS524Ev2 SUPPORT LACP OR ONLY LAG?

[JohnRo]

Hello Englerch, 

It does have both LAG and LACP, please check page 92 of the User Manual. This will also show you how LACP is configured on the switch. 

Thanks, 

[Englerch]

Sorry, there is no menu for LACP, only for lag!

anywhere there is no advanced-option.

regards, Christian Engler

[JohnRo · Accepted solution]

Hello Englerch, 

Sorry for that, I have to take that back. There is no LACP for JGS524Ev2, I apologize for this. The JGS524Ev2 is only a ProSafe Plus model, the manual I have posted belongs to a Smart Managed switch (GS108Tv2 and GS110TP).

Thanks, 

[Englerch]

Are you talking about a softwaretool?

I am a Mac-User.

Want TL configure over Web-Interface.

regards, Christian

[JohnRo]

Hello Englerch, 

No, I am not. Those are switch families that I have mentioned. The Prosafe Plus models do not support LACP while the Smart Managed models do. 

Let us know if you have more questions. 

Thanks,