× Get free training on Switching for AV over IP and receive AVIXA Credits. Sign up at NETGEAR.academy
Reply

M4300 and PTPV2 Support

Sdest
Aspirant

M4300 and PTPV2 Support

Dear all, 

Do you know if the ptpv2 is available on the M4300 series?

it is for use on boundary ptpv2 for a AES67 network.

thanks in advance for your help.

kind regard 

steve

Message 1 of 3

Accepted Solutions
LaurentMa
NETGEAR Expert

Re: M4300 and PTPV2

Hi Sdest

Thank you for your message. M4300 switches should become PTP aware by October time frame, with IEEE 1588 PTPv2. For the time being, we successfully assess AES67 as well as other variants like Dante, and without being PTP aware we still can assign highest priority to PTP packets using DiffServ.

Can you take a look at our KB on Dante audio? AES67 should be very similar, and the very same for prioritizing these PTP packets: https://kb.netgear.com/000060205/M4300-Configuration-Guide-for-Dante-Audio-Devices

View solution in original post

Message 2 of 3

All Replies
LaurentMa
NETGEAR Expert

Re: M4300 and PTPV2

Hi Sdest

Thank you for your message. M4300 switches should become PTP aware by October time frame, with IEEE 1588 PTPv2. For the time being, we successfully assess AES67 as well as other variants like Dante, and without being PTP aware we still can assign highest priority to PTP packets using DiffServ.

Can you take a look at our KB on Dante audio? AES67 should be very similar, and the very same for prioritizing these PTP packets: https://kb.netgear.com/000060205/M4300-Configuration-Guide-for-Dante-Audio-Devices

Message 2 of 3
Sdest
Aspirant

Re: M4300 and PTPV2

Thank for you feedback 

 

Message 3 of 3
Discussion stats
  • 2 replies
  • 3811 views
  • 1 kudo
  • 2 in conversation
Announcements

AV over IP Switches by NETGEAR