× Get free training on Switching for AV over IP and receive AVIXA Credits. Sign up at NETGEAR.academy
Reply

Re: NETGEAR IGMP Plus Whitepaper

RandyL
NETGEAR Expert

NETGEAR IGMP Plus Whitepaper

What is NETGEAR IGMP Plus™?
NETGEAR’s AV Line M4250, M4300 and M4500 fully-managed switches provide a unique feature called IGMP Plus. This feature greatly simplifies system architectures by enabling the same well-known IGMP techniques across the entire AV over IP (AVoIP) network. In a nutshell, IGMP Plus is an enhanced implementation for automatic multicast across a Layer 2 multicast network.

 

Why is NETGEAR IGMP Plus Important? 
NETGEAR IGMP Plus provides ProAV network engineers with an effortless implementation of a Layer 2 multicast network. With other switching vendors, the process of configuring a ProAV multicast VLAN requires many IGMP commands to be entered via the command line which introduces the possibility of user error due to the complexity

 

Download the whitepaper explaining the new IGMP Plus feature on the M4250, M4300 and M4500 switches.

NETGEAR-IGMP-Plus-Whitepaper-320rx-x-320tx-10G.png

Click here to download the IGMP Plus whitepaper .

Message 1 of 12
c_b
Tutor
Tutor

Re: NETGEAR IGMP Plus Whitepaper

Read the whitepaper, thanks - but what is the single command to enable IGMP Plus?

Message 2 of 12
RandyL
NETGEAR Expert

Re: NETGEAR IGMP Plus Whitepaper

Hi c_b,

 

The M4300 and M4500 has the IGMP-plus commands in the latest firmware release. Please keep in mind that the single (CLI) command is to configure IGMP and the other IGMP options on the specified configured VLAN.

 

igmp-plus<vlan-id> This command enables IGMP enhancements for the specified VLAN to support audio and video devices in an SDVoE environment.

 

Format     igmp-plus<vlan-id>
                no igmp-plus<vlan-id>

Default     igmp-plus 1

Mode       Global Config

 

Thanks,

Randy

Message 3 of 12
c_b
Tutor
Tutor

Re: NETGEAR IGMP Plus Whitepaper

Thanks Randy.

Message 4 of 12
c_b
Tutor
Tutor

Re: NETGEAR IGMP Plus Whitepaper

Please could you confirm the exact version that includes the new command?  Thanks.

Message 5 of 12
c_b
Tutor
Tutor

Re: NETGEAR IGMP Plus Whitepaper

The IGMP+ command doesn't work on the latest version, 12.0.9.4.  Which version supports the command?

Thanks.

Message 6 of 12
RandyL
NETGEAR Expert

Re: NETGEAR IGMP Plus Whitepaper

Hi c_b,

Sorry for the confusion. Currently, only the M4500 has the 'igmp-plus <VLAN ID>' command and it available in the latest release (7.0.0.16).
Please see the command reference for the M4500:

https://www.downloads.netgear.com/files/GDC/M4500/M4500_CLI_EN.pdf

 

The M4300 with the current release (12.0.9.4), does not contain the 'igmp-plus <VLANID>' command. With version 12.0.9.3 contains enhancements for IGMP commands. Below is the enhancement and new commands:

 

Enhancements to IGMP for M4300 for 12.0.9.3 (https://kb.netgear.com/000061381/M4300-Firmware-Version-12-0-9-3😞
- IGMP Snooping enhancement so that NETGEAR switches can be used as a plug-and-play for audio and video applications.
  1. set igmp flood-report
  2. set igmp exclude-mrouter-intf
  3. set igmp fast-leave auto-assignment

 

The ETA for the command 'igmp-plus <VLAN ID>' on the M4300 is set to be released in 2 weeks (12.0.11.x).

 

We'll provide a link to the new image when available.

 

Thanks.

Message 7 of 12
c_b
Tutor
Tutor

Re: NETGEAR IGMP Plus Whitepaper

Great, thanks for the clarification.

Message 8 of 12
BretD
Admin

Re: NETGEAR IGMP Plus Whitepaper

An updated IGMP Plus Whitepaper is now available including information on IGMP Plus on M4250 AV Line Switches

Message 9 of 12
CrazyGoose
Aspirant

Re: NETGEAR IGMP Plus Whitepaper

Great whitepaper but I would love to know where the information is based on that you need 14 steps to configure IGMP in a GigaCore 26i as this is enabled by deafault?

Message 10 of 12
schumaku
Guru

Re: NETGEAR IGMP Plus Whitepaper


@CrazyGoose wrote:

Great whitepaper but I would love to know where the information is based on that you need 14 steps to configure IGMP in a GigaCore 26i as this is enabled by deafault?


It's not about "just2 enabling IGMP. There is a Cisco-like sample config shown above the table. hard to imagine this is already there in place.

Message 11 of 12
CrazyGoose
Aspirant

Re: NETGEAR IGMP Plus Whitepaper

By default, in every group/vlan already available in the switches (20 are pre-made for you) the IGMP querier and snooping are enabled by default. The global settings have IGMP unknown flooding enabled so all you would have to do is disable this or disable it in a group which will not take 14 commands hence why I would love to know where that number is comming from?

Message 12 of 12
Discussion stats
  • 11 replies
  • 25897 views
  • 6 kudos
  • 5 in conversation
Announcements

AV over IP Switches by NETGEAR