× NETGEAR will be terminating ReadyCLOUD service by July 1st, 2023. For more details click here.
Orbi WiFi 7 RBE973
Reply

Suddenly (on latest beta 6.4.0 Beta4) rsync starts to fail...

marcusclaus
Guide

Suddenly (on latest beta 6.4.0 Beta4) rsync starts to fail...

I have been using rsync for incremental backups on a RN102 pulling data from an RN314 unit. Suddenly on one particular file rsync starts to fail:

 

Backup Job Name: från BIGHUB RSYNC-mappen
Backup Job Type: Incremental
Protocol: rsync
Backup Source: [remote:rsync]/mchome.dyndns-home.com::Backup/RSYNC/
Backup Destination: [Backup]/RSYNC
Backup Start Time: Sun Sep 13 2015 15:32:41
Backup Finish Time: Sun Sep 13 2015 15:45:20
Backup Status: Fail: failure during copy.

Failed to run rsync, return rc 2560 (10)
'rsync' command returns rc=2560

HP-ARBETSRUMMET/Outlook/
MARCUS-LAPTOP/Outlook/archive.pst
rsync: [generator] write error: Connection reset by peer (104)
rsync error: error in socket IO (code 10) at io.c(820) [generator=3.1.1]

 

This started the same day as I installed the 6.4.0 beta4 on the system (both units). I checked if compression on/off would change the situation but it occurss independently of the setting of rsync compression.

 

I similar error occurred on another file (a media MP4 file though) that previously had copied correctly. I however deleted that file from the source so that particular problem is no longer an issue.

 

So something with the latest 6.4.0 release might have caused rsync to become unstable?

 

 

 

 

Message 1 of 8
kohdee
NETGEAR Expert

Re: Suddenly (on latest beta 6.4.0 Beta4) rsync starts to fail...

Is your PST actively mounted in outlook? If so, then that file is not readable and will cause a backup job to fail. 

Message 2 of 8
marcusclaus
Guide

Re: Suddenly (on latest beta 6.4.0 Beta4) rsync starts to fail...

It is not that problem. The rsync job runs between two NASes and with no client (eg outlook machine) accessing them

 

Message 3 of 8
StephenB
Guru

Re: Suddenly (on latest beta 6.4.0 Beta4) rsync starts to fail...


@marcusclaus wrote:

It is not that problem. The rsync job runs between two NASes and with no client (eg outlook machine) accessing them

 


Did you try copying the file manually (CIFS or NFS)

Message 4 of 8
kohdee
NETGEAR Expert

Re: Suddenly (on latest beta 6.4.0 Beta4) rsync starts to fail...

The transfer @marcusclaus is doing is over the internet as per the job details.


How large are the files that it can't transfer? I can see about reproducing. I have like 3 PSTs that range between 1 GB and 3 GB I can try with.

Message 5 of 8
StephenB
Guru

Re: Suddenly (on latest beta 6.4.0 Beta4) rsync starts to fail...


@kohdee wrote:

The transfer @marcusclaus is doing is over the internet as per the job details.

 


I missed that.

 

If he has remote access to the source it still might be worth copying the problematic file manually (maybe to another share).

 

Seems to me a btrfs checksum failure could do something like this.

Message 6 of 8
marcusclaus
Guide

Re: Suddenly (on latest beta 6.4.0 Beta4) rsync starts to fail...

I deleted the 2,9 GB archive.pst file. The same problem happen. Before 6.4.0 firmware upgrade the rsync worked. But not anymore.

 

Backup Job Name: från BIGHUB RSYNC-mappen
Backup Job Type: Incremental
Protocol: rsync
Backup Source: [remote:rsync]/192.168.1.2::Backup/RSYNC/
Backup Destination: [Backup]/RSYNC
Backup Start Time: Mon Oct 12 2015 15:37:38
Backup Finish Time: Mon Oct 12 2015 16:01:09
Backup Status: Fail: failure during copy.

Failed to run rsync, return rc 2560 (10)
'rsync' command returns rc=2560

MARCUS-LAPTOP/Outlook/
MARCUS-LAPTOP/Outlook/archive.pst
rsync: [generator] write error: Connection reset by peer (104)
rsync error: error in socket IO (code 10) at io.c(820) [generator=3.1.1]
rsync error: received SIGUSR1 (code 19) at main.c(1434) [receiver=3.1.1]
 received SIGUSR1 (code 19) at main.c(1434) [receiver=3.1.1]

 

from other posts, there seem to be several rsync related bugs now in 6.4.0....

Message 7 of 8
ernst_stucki
Aspirant

Re: Suddenly (on latest beta 6.4.0 Beta4) rsync starts to fail...

I tried the Beta release 6.4.1. The problem is the same, I get timeouts on my rsync job coppying from pc to ReadyNas. What I also noticed since 6.4.1, the access to some folders is very slow, some times more than 20s. With 6.2.5 the access time was hardly ever more than 2s.

Message 8 of 8
Discussion stats
  • 7 replies
  • 5523 views
  • 0 kudos
  • 4 in conversation
Announcements