Readynasos 6.4.0-T112 temperature fan speed on Ultra6

[giovannip]

I have an Ultra6, I get the internal enclosure warning with a 34C° detected .... what file I should fix ? I tried with ULTRA6.conf without luck .... here how it looks like now

chip "coretemp-isa-0000"
        label temp2 "CPU"
        ignore temp3

chip "it8721-isa-*"
        ignore in0
        label in0 "V+12"
        compute in0 @*4, @/4
        set in0_min 10.8
        set in0_max 13.2
        label in1 "V5_0"
        compute in1 @*1.68, @/1.68
        set in1_min 4.75
        set in1_max 5.25
        label in2 "V3_3"
        compute in2 @*1.649, @/1.649
        set in2_min 3.135
        set in2_max 3.465
        ignore in3
        label in4 "V1_2"
        set in4_min 1
        set in4_max 1.3
        label in5 "V1_8"
        set in5_min 1.5
        set in5_max 2.1
        label in6 "V-12"
        compute in6 @*19-50.4, (@+50.4)/19
        set in6_min -13.2
        set in6_max -10.8
        set in7_min 3.135
        set in7_max 3.465
        ignore fan1
        ignore fan2
        label fan3 "System"
        set fan3_min 400
        set temp1_min 1
        set temp1_max 60
        label temp2 "System"
        set temp2_min 1
        set temp2_max 80
        set temp3_min 1
        set temp3_max 80
        ignore intrusion0
 

forgot to say that in the last 3 days I received more than 800 warning email ....

Thanks

G

[Skywalker · Accepted solution]

I just removed all of his custom sensors configuration.

[BrianL2]

Hi giovannip,

Kindly update the firmware using the official 6.4.0 and see if you will get the same temperature in your ReadyNAS device.

Kind regards,

BrianL
NETGEAR Community Team

[giovannip]

Hi BrianL

Yes, same warning is displayed. Nothing changed

G

[BrianL2]

Hi giovannip,

Thanks for the update. Kindly send us a copy of the device logs so we can have a further look.  

Kind regards,

BrianL
NETGEAR Community Team

[giovannip]

Did you get all the stuff ?

Regards

G

[BrianL2]

Hi giovannip,

Yeah I got it. I am still checking it.

Kind regards,

BrianL
NETGEAR Community Team

[giovannip]

Everything was already fixed by your collegue remotely

Thanks

G

[BrianL2]

Hi giovannip,

Could you share us what my colleague did to fix the fan issue in your ReadyNAS unit?

Kind regards,

BrianL
NETGEAR Community Team

[Skywalker · Accepted solution]

I just removed all of his custom sensors configuration.