Orbi WiFi 7 RBE973
Reply

New RN42400, can I load my old RN314 drives directly?

jimk1963
Luminary

New RN42400, can I load my old RN314 drives directly?

Hi All,

 

Received an RN42400 (diskless) ReadyNAS, was thinking about swapping my RN314 disks into it. Believe the RN424 is newer (faster??), maybe better performance. Is it possible to simply move the HDD's from the 314 to the RN424 or is this a terrible idea? RN314 is on latest NTGR software. If not possible, what's the best procedure?

 

One thought I had:  I have a 2nd NAS with all the same files. Suppose I could wipe/reformat the drives in the 314 (actually not sure how I would do that... now that I think about it, I don't have an external HDD bay to plug a drive into). Once wiped/reformatted, then install drives into 424 and copy over all the files. Tedious option, but I guess it would work?

Message 1 of 6

Accepted Solutions
jimk1963
Luminary

Re: New RN42400, can I load my old RN314 drives directly?

Nevermind, "figured it out"... sorta.  All I did was force a reboot, this time unit came up recognizing the volume and all the files. So I guess the lesson is - when you swap disks, and device goes through a complete cycle... then cycle the unit once more for the volume to be properly read. At least on this RN42400 box.

View solution in original post

Message 5 of 6

All Replies
StephenB
Guru

Re: New RN42400, can I load my old RN314 drives directly?


@jimk1963 wrote:

Is it possible to simply move the HDD's from the 314 to the RN424

Yes, just move the disks with both NAS powered down.

Message 2 of 6
jimk1963
Luminary

Re: New RN42400, can I load my old RN314 drives directly?

Thanks @StephenB , worked and actually automatically updated to latest 6.10.8 plus latest antivirus.

 

However, now it doesn't seem to know the volume(s) I had on the drives. Pictures attached show what I now see. Not sure what to do next?

 

Screenshot 2023-05-22 141230.pngScreenshot 2023-05-22 141259.png

Message 3 of 6
jimk1963
Luminary

Re: New RN42400, can I load my old RN314 drives directly?

RN314 was in XRAID mode, so I believe there was only one volume. I never made multiple volumes.

Message 4 of 6
jimk1963
Luminary

Re: New RN42400, can I load my old RN314 drives directly?

Nevermind, "figured it out"... sorta.  All I did was force a reboot, this time unit came up recognizing the volume and all the files. So I guess the lesson is - when you swap disks, and device goes through a complete cycle... then cycle the unit once more for the volume to be properly read. At least on this RN42400 box.

Message 5 of 6
Sandshark
Sensei

Re: New RN42400, can I load my old RN314 drives directly?

The second re-boot can be necessary if the OS versions don't match.  On the first boot, it updates so that the version in flash and on the drives match.

Message 6 of 6
Discussion stats
  • 5 replies
  • 2079 views
  • 1 kudo
  • 3 in conversation
Announcements