Reply
Contributor
Posts: 20
Registered: ‎2009-06-30

KVR400X64SC3A/1G 1GB

I have tried two of these in my NV+. The result was a non booting NV+. This memorymodule should be removed from the compatibility list. The user 'geekstarpilot' experienced also the same problem with this module. On the internet are more posts regarding this module using the Readynas DUO (also with problems).
So I do not recommend using this (I guess the current revision is somehow a bit different compared to the ones which other users are using with success)
Initial Contributor
Posts: 1
Registered: ‎2011-06-22

Re: KVR400X64SC3A/1G 1GB

Have the same problem, the KVR400x64SC3A/1G does NOT work. Remove it from the compatibility list.
Initial Contributor
Posts: 3
Registered: ‎2011-06-11

Re: KVR400X64SC3A/1G 1GB

Just encounted the very much earlier comments about this. By accident found positive views about this memory module (well before I found this info) - so installed on NAS Duo 2 x Tbye RAID 4.1.7 setup - has functioned perfectly from the off - now been running continuously for 5 months. Don't know the cause of the problem with higher spec NASs.
Discussion Stats
  • 2 replies
  • 56 views
  • 0 kudos
  • 3 in conversation
Top Contributors