Any plan for officially upgrading pydio and php?

sunsina · ‎2015-08-12

I am wondering why the appications on the application market OS 6.3.5 are so outdated.
As an example Pydio is very outdated (v5.2.3) and the latest version is 6.0.8 (which recommends php >5.6.x)
Neither PHP nor Pydio 6.0> are officialy availiable and the pydio internal webpage upgrading of the old pydio to version 6.0.8
does not work properly and after upgrading the upgraded pydion can not commiunicate with its pydiosync 6+ PC application and many of the settings
will not work.

Is there any plan for upgrading both of them officialy ??

super_poussin · ‎2015-08-13

Tak e a look in the community dropbox 6.0.1 and 6.0.6 <ith php 5.6 are available since a long time will put 6.0.8

sunsina · ‎2015-08-15

Hi,
This is the error that I get

# dpkg -i pydio_6.0.8_all.deb
Selecting previously unselected package pydio.
(Reading database ... 17310 files and directories currently installed.)
Unpacking pydio (from pydio_6.0.8_all.deb) ...
--2015-08-15 16:20:30--  http://www.dotdeb.org/dotdeb.gpg
Resolving www.dotdeb.org (www.dotdeb.org)... 195.154.242.153
Connecting to www.dotdeb.org (www.dotdeb.org)|195.154.242.153|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5299 (5.2K) [application/octet-stream]
Saving to: ‘dotdeb.gpg’

dotdeb.gpg                          100%[==================================================================>]   5.17K  --.-KB/s   in 0s

2015-08-15 16:20:30 (118 MB/s) - ‘dotdeb.gpg’ saved [5299/5299]

OK
dpkg: dependency problems prevent configuration of pydio:
 pydio depends on php5-gd (>= 5.6.4~); however:
  Version of php5-gd on system is 5.4.41-0+deb7u1.
 pydio depends on php5-pthreads; however:
  Package php5-pthreads is not installed.

dpkg: error processing pydio (--install):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pydio

Would you mind kindly tell me step by step how can I fix the dependencies errors?

I suppose that the PHP5.6 is included in this .deb package
Thanks

mdgm-ntgr · ‎2015-08-16

No. You need to install the PHP5.6 package first.

sunsina · ‎2015-08-19

Where and how?
Is it avaliable on ReadyNAS repository or shall I download it as a debian package that is avaliable on the community dropbox which is 12KB!?

I tried the 12KB .deb package on the community dropbox and I still get following problem.

dpkg: dependency problems prevent configuration of pydio:
pydio depends on php5-gd (>= 5.6.4~); however:
Version of php5-gd on system is 5.4.41-0+deb7u1.
pydio depends on php5-pthreads; however:
Package php5-pthreads is not installed.

dpkg: error processing pydio (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:

super_poussin · ‎2015-08-19

Take a look here : https://www.dropbox.com/sh/ckfbxakh54ujujy/AADSzLvxBhz9Cp1hXMEYuBUCa?dl=0

Read the text file and pleas einstall it from gui 🙂

sunsina · ‎2015-08-23

Hi,
I already read the readme_1st.txt file I tried a couple of times-more than 3 times! gui installation and I always get System: Failed to install application 'pydio_6.0.8_all.deb'.

I also tried apt-get update , and dpkg -i pydio_6.0.8_all.deb

I GET SAME ERRORS
In addition I have no owncloud on my NAS,

dotdeb.gpg                                                 100%[=======================================================================================================================================>]   5.17K  --.-KB/s   in 0s

2015-08-23 14:06:30 (108 MB/s) - ‘dotdeb.gpg’ saved [5299/5299]

OK

dpkg: dependency problems prevent configuration of pydio:
 pydio depends on php5-gd (>= 5.6.4~); however:
  Version of php5-gd on system is 5.4.41-0+deb7u1.
 pydio depends on php5-pthreads; however:
  Package php5-pthreads is not installed.

dpkg: error processing pydio (--install):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pydio

I have following apps installed on my system (I have no clue if something is missed or not!!!!)
My RDNAS-OS version is 6.3.5

Symform 4.24.0
MySql Server 1.0.1

SMB Plus 1.0.3

Transmission for ReadyNAS 3.00.8
htop 1.0.0

Pydio package 6.0.8-14MB provided on your dropbox is not at all installing (Even several time trying via GUI,TERMINAL).

I think you have updated/installed php on your device in different way.

super_poussin · ‎2015-08-24

can you try

apt-get install php5

to force upgrade ?

sunsina · ‎2015-08-24

Ok,
I tried following commands with following results.
Meanwhile(after execution of commands) I tried to install pydio via GUI and terminal

I executed following commands (in sequence)

root@RDNASOS6-X:~# apt-get install php5
Reading package lists... Done
Building dependency tree
Reading state information... Done
php5 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 54 not upgraded.
root@RDNASOS6-X:~# apt-get update
Hit http://security.debian.org wheezy/updates InRelease
Ign http://mirrors.kernel.org wheezy InRelease
Hit http://security.debian.org wheezy/updates/main amd64 Packages
Hit http://mirrors.kernel.org wheezy Release.gpg
Hit http://mirrors.kernel.org wheezy Release
Hit http://mirrors.kernel.org wheezy/main amd64 Packages
Ign http://apt.readynas.com 6.4.0 InRelease
Get:1 http://apt.readynas.com 6.4.0 Release.gpg [490 B]
Get:2 http://apt.readynas.com 6.4.0 Release [22.2 kB]
Hit http://apt.readynas.com 6.4.0/updates amd64 Packages
Hit http://apt.readynas.com 6.4.0/apps amd64 Packages
Hit http://apt.readynas.com 6.4.0/main amd64 Packages
Fetched 22.7 kB in 7s (2,869 B/s)
Reading package lists... Done
root@RDNASOS6-X:~# apt-get install php5
Reading package lists... Done
Building dependency tree
Reading state information... Done
php5 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 54 not upgraded.

apt-get upgrade
.....
.
...
.

root@RDNASOS6-X:~# apt-get install  php5
Reading package lists... Done
Building dependency tree
Reading state information... Done
php5 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
4 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n]
Setting up nut-client (2.7.3-0.netgear2) ...
insserv: warning: script 'leafp2p' missing LSB tags and overrides
[....] Restarting nut-client (via systemctl): nut-client.serviceJob failed. See system journal and '
 failed!
invoke-rc.d: initscript nut-client, action "restart" failed.
dpkg: error processing nut-client (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of nut-server:
 nut-server depends on nut-client (= 2.7.3-0.netgear2); however:
  Package nut-client is not configured yet.

dpkg: error processing nut-server (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nut:
 nut depends on nut-server; however:
  Package nut-server is not configured yet.
 nut depends on nut-client; however:
  Package nut-client is not configured yet.

dpkg: error processing nut (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nut-snmp:
 nut-snmp depends on nut (>= 1.4.1-pre1); however:
  Package nut is not configured yet.

dpkg: error processing nut-snmp (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 nut-client
 nut-server
 nut
 nut-snmp
E: Sub-process /usr/bin/dpkg returned an error code (1)

root@RDNASOS6-X:/tmp# dpkg -i pydio_6.0.8_all.deb
Selecting previously unselected package pydio.
(Reading database ... 16200 files and directories currently installed.)
Unpacking pydio (from pydio_6.0.8_all.deb) ...
--2015-08-24 20:51:35--  http://www.dotdeb.org/dotdeb.gpg
Resolving www.dotdeb.org (www.dotdeb.org)... 195.154.242.153
Connecting to www.dotdeb.org (www.dotdeb.org)|195.154.242.153|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5299 (5.2K) [application/octet-stream]
Saving to: ‘dotdeb.gpg’

dotdeb.gpg               100%[====================================>]   5.17K  --.-KB/s   in 0s

2015-08-24 20:51:35 (114 MB/s) - ‘dotdeb.gpg’ saved [5299/5299]

OK
dpkg: dependency problems prevent configuration of pydio:
 pydio depends on php5-gd (>= 5.6.4~); however:
  Version of php5-gd on system is 5.4.41-0+deb7u1.
 pydio depends on php5-pthreads; however:
  Package php5-pthreads is not installed.

dpkg: error processing pydio (--install):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pydio

root@RDNASOS6-X:/tmp# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
4 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up nut-client (2.7.3-0.netgear2) ...
insserv: warning: script 'leafp2p' missing LSB tags and overrides
[....] Restarting nut-client (via systemctl): nut-client.serviceJob failed. See system journal and 'systemctl status' for details.
 failed!
invoke-rc.d: initscript nut-client, action "restart" failed.
dpkg: error processing nut-client (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of nut-server:
 nut-server depends on nut-client (= 2.7.3-0.netgear2); however:
  Package nut-client is not configured yet.

dpkg: error processing nut-server (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nut:
 nut depends on nut-server; however:
  Package nut-server is not configured yet.
 nut depends on nut-client; however:
  Package nut-client is not configured yet.

dpkg: error processing nut (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nut-snmp:
 nut-snmp depends on nut (>= 1.4.1-pre1); however:
  Package nut is not configured yet.

dpkg: error processing nut-snmp (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 nut-client
 nut-server
 nut
 nut-snmp
E: Sub-process /usr/bin/dpkg returned an error code (1)

NOTHING WORKED

I am wondering why there is no plan to bring this app PHP >5.6/Pydio 6.0.8 into the ReadyNAS OS AppMarket !??

super_poussin · ‎2015-08-24

sounds like something is missin on your nas , very strange

can you do this :

cd /etc/apt/sources.list.d/

then creat a file called dotdeb.list

and put in it :

deb http://packages.dotdeb.org wheezy-php56 all
deb-src http://packages.dotdeb.org wheezy-php56 all

save the file and do

apt-get update

apt-get install php5

then install pydio

sunsina · ‎2015-08-26

Ok, I tried your solution.
It installed PHP5.6 with couple of errors (but php5-threads does not install)

The following extra packages will be installed:
  libapache2-mod-php5 libphp5-embed libt1-5 libvpx1 php5-cli php5-common php5-curl php5-gd
  php5-imap php5-mcrypt php5-mysql
Suggested packages:
  php5-user-cache
Recommended packages:
  php5-readline
The following NEW packages will be installed:
  libt1-5 libvpx1
The following packages will be upgraded:
  libapache2-mod-php5 libphp5-embed php5 php5-cli php5-common php5-curl php5-gd php5-imap
  php5-mcrypt php5-mysql
10 upgraded, 2 newly installed, 0 to remove and 4 not upgraded.
4 not fully installed or removed.
Need to get 10.6 MB of archives.
After this operation, 5,826 kB of additional disk space will be used.
Do you want to continue? [Y/n]
Get:1 http://packages.dotdeb.org/ wheezy-php56/all php5-mysql amd64 5.6.12-1~dotdeb+7.1 [86.1 kB]
Get:2 http://packages.dotdeb.org/ wheezy-php56/all php5-mcrypt amd64 5.6.12-1~dotdeb+7.1 [18.0 kB]
Get:3 http://mirrors.kernel.org/debian/ wheezy/main libvpx1 amd64 1.1.0-1 [290 kB]
Get:4 http://packages.dotdeb.org/ wheezy-php56/all php5-imap amd64 5.6.12-1~dotdeb+7.1 [38.0 kB]
Get:5 http://packages.dotdeb.org/ wheezy-php56/all php5-gd amd64 5.6.12-1~dotdeb+7.1 [142 kB]
Get:6 http://packages.dotdeb.org/ wheezy-php56/all php5-cli amd64 5.6.12-1~dotdeb+7.1 [2,960 kB]
Get:7 http://mirrors.kernel.org/debian/ wheezy/main libt1-5 amd64 5.1.2-3.6 [174 kB]
Get:8 http://packages.dotdeb.org/ wheezy-php56/all libphp5-embed amd64 5.6.12-1~dotdeb+7.1 [3,044 kB]
Get:9 http://packages.dotdeb.org/ wheezy-php56/all php5-curl amd64 5.6.12-1~dotdeb+7.1 [34.1 kB]
Get:10 http://packages.dotdeb.org/ wheezy-php56/all libapache2-mod-php5 amd64 5.6.12-1~dotdeb+7.1 [3,045 kB]
Get:11 http://packages.dotdeb.org/ wheezy-php56/all php5-common amd64 5.6.12-1~dotdeb+7.1 [763 kB]
Get:12 http://packages.dotdeb.org/ wheezy-php56/all php5 all 5.6.12-1~dotdeb+7.1 [1,192 B]
Fetched 10.6 MB in 7s (1,338 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libvpx1:amd64.
(Reading database ... 16201 files and directories currently installed.)
Unpacking libvpx1:amd64 (from .../libvpx1_1.1.0-1_amd64.deb) ...
Preparing to replace php5-mysql 5.4.41-0+deb7u1 (using .../php5-mysql_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement php5-mysql ...
Preparing to replace php5-mcrypt 5.4.41-0+deb7u1 (using .../php5-mcrypt_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement php5-mcrypt ...
Preparing to replace php5-imap 5.4.41-0+deb7u1 (using .../php5-imap_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement php5-imap ...
Selecting previously unselected package libt1-5.
Unpacking libt1-5 (from .../libt1-5_5.1.2-3.6_amd64.deb) ...
Preparing to replace php5-gd 5.4.41-0+deb7u1 (using .../php5-gd_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement php5-gd ...
Preparing to replace php5-cli 5.4.41-0+deb7u1 (using .../php5-cli_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement php5-cli ...
Preparing to replace libphp5-embed 5.4.41-0+deb7u1 (using .../libphp5-embed_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement libphp5-embed ...
Preparing to replace php5-curl 5.4.41-0+deb7u1 (using .../php5-curl_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement php5-curl ...
Preparing to replace libapache2-mod-php5 5.4.41-0+deb7u1 (using .../libapache2-mod-php5_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement libapache2-mod-php5 ...
Preparing to replace php5-common 5.4.41-0+deb7u1 (using .../php5-common_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement php5-common ...
dpkg: warning: unable to delete old directory '/etc/php5/conf.d': Directory not empty
Preparing to replace php5 5.4.41-0+deb7u1 (using .../php5_5.6.12-1~dotdeb+7.1_all.deb) ...
Unpacking replacement php5 ...
Setting up nut-client (2.7.3-0.netgear2) ...
insserv: warning: script 'leafp2p' missing LSB tags and overrides
[....] Restarting nut-client (via systemctl): nut-client.serviceJob failed. See system journal and 'systemctl status' for details.
 failed!
invoke-rc.d: initscript nut-client, action "restart" failed.
dpkg: error processing nut-client (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of nut-server:
 nut-server depends on nut-client (= 2.7.3-0.netgear2); however:
  Package nut-client is not configured yet.

dpkg: error processing nut-server (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nut:
 nut depends on nut-server; however:
  Package nut-server is not configured yet.
 nut depends on nut-client; however:
  Package nut-client is not configured yet.

dpkg: error processing nut (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nut-snmp:
 nut-snmp depends on nut (>= 1.4.1-pre1); however:
  Package nut is not configured yet.

dpkg: error processing nut-snmp (--configure):
 dependency problems - leaving unconfigured
Setting up libvpx1:amd64 (1.1.0-1) ...
Setting up php5-common (5.6.12-1~dotdeb+7.1) ...
Installing new version of config file /etc/cron.d/php5 ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
php5_invoke: Enable module pdo for cli SAPI
php5_invoke: Enable module pdo for embed SAPI
php5_invoke: Enable module pdo for apache2 SAPI
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline

Creating config file /etc/php5/mods-available/opcache.ini with new version
php5_invoke: Enable module opcache for cli SAPI
php5_invoke: Enable module opcache for embed SAPI
php5_invoke: Enable module opcache for apache2 SAPI
Setting up php5-mysql (5.6.12-1~dotdeb+7.1) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
php5_invoke: Enable module mysql for cli SAPI
php5_invoke: Enable module mysql for embed SAPI
php5_invoke: Enable module mysql for apache2 SAPI
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
php5_invoke: Enable module mysqli for cli SAPI
php5_invoke: Enable module mysqli for embed SAPI
php5_invoke: Enable module mysqli for apache2 SAPI
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
php5_invoke: Enable module pdo_mysql for cli SAPI
php5_invoke: Enable module pdo_mysql for embed SAPI
php5_invoke: Enable module pdo_mysql for apache2 SAPI
Setting up php5-mcrypt (5.6.12-1~dotdeb+7.1) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
php5_invoke: Enable module mcrypt for cli SAPI
php5_invoke: Enable module mcrypt for embed SAPI
php5_invoke: Enable module mcrypt for apache2 SAPI
Setting up php5-imap (5.6.12-1~dotdeb+7.1) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
php5_invoke: Enable module imap for cli SAPI
php5_invoke: Enable module imap for embed SAPI
php5_invoke: Enable module imap for apache2 SAPI
Setting up libt1-5 (5.1.2-3.6) ...
Setting up php5-gd (5.6.12-1~dotdeb+7.1) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
php5_invoke: Enable module gd for cli SAPI
php5_invoke: Enable module gd for embed SAPI
php5_invoke: Enable module gd for apache2 SAPI
Setting up php5-cli (5.6.12-1~dotdeb+7.1) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
Replacing config file /etc/php5/cli/php.ini with new version
Setting up libphp5-embed (5.6.12-1~dotdeb+7.1) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
Replacing config file /etc/php5/embed/php.ini with new version
Setting up php5-curl (5.6.12-1~dotdeb+7.1) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
php5_invoke: Enable module curl for cli SAPI
php5_invoke: Enable module curl for embed SAPI
php5_invoke: Enable module curl for apache2 SAPI
Setting up libapache2-mod-php5 (5.6.12-1~dotdeb+7.1) ...
Installing new version of config file /etc/apache2/mods-available/php5.conf ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
Replacing config file /etc/php5/apache2/php.ini with new version
Setting up php5 (5.6.12-1~dotdeb+7.1) ...
Processing triggers for libc-bin ...
Errors were encountered while processing:
 nut-client
 nut-server
 nut
 nut-snmp
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@RDNASOS6-X:/etc/apt/sources.list.d#  apt-get update
Hit http://security.debian.org wheezy/updates/main amd64 Packages
Get:2 http://packages.dotdeb.org wheezy-php56/all Sources [8,273 B]
Get:3 http://packages.dotdeb.org wheezy-php56/all amd64 Packages [16.5 kB]
Ign http://apt.readynas.com 6.4.0 InRelease
Get:4 http://apt.readynas.com 6.4.0 Release.gpg [490 B]
Ign http://mirrors.kernel.org wheezy InRelease
Hit http://mirrors.kernel.org wheezy Release.gpg
Hit http://mirrors.kernel.org wheezy Release
Get:5 http://apt.readynas.com 6.4.0 Release [22.2 kB]
Hit http://mirrors.kernel.org wheezy/main amd64 Packages
Hit http://apt.readynas.com 6.4.0/updates amd64 Packages
Hit http://apt.readynas.com 6.4.0/apps amd64 Packages
Hit http://apt.readynas.com 6.4.0/main amd64 Packages
Fetched 51.4 kB in 4s (11.7 kB/s)
Reading package lists... Done
root@RDNASOS6-X:/etc/apt/sources.list.d# apt-get install php5
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libapache2-mod-php5 libphp5-embed libt1-5 libvpx1 php5-cli php5-common php5-curl php5-gd
  php5-imap php5-mcrypt php5-mysql
Suggested packages:
  php5-user-cache
Recommended packages:
  php5-readline
The following NEW packages will be installed:
  libt1-5 libvpx1
The following packages will be upgraded:
  libapache2-mod-php5 libphp5-embed php5 php5-cli php5-common php5-curl php5-gd php5-imap
  php5-mcrypt php5-mysql
10 upgraded, 2 newly installed, 0 to remove and 4 not upgraded.
4 not fully installed or removed.
Need to get 10.6 MB of archives.
After this operation, 5,826 kB of additional disk space will be used.
Do you want to continue? [Y/n]
Get:1 http://packages.dotdeb.org/ wheezy-php56/all php5-mysql amd64 5.6.12-1~dotdeb+7.1 [86.1 kB]
Get:2 http://packages.dotdeb.org/ wheezy-php56/all php5-mcrypt amd64 5.6.12-1~dotdeb+7.1 [18.0 kB]
Get:3 http://mirrors.kernel.org/debian/ wheezy/main libvpx1 amd64 1.1.0-1 [290 kB]
Get:4 http://packages.dotdeb.org/ wheezy-php56/all php5-imap amd64 5.6.12-1~dotdeb+7.1 [38.0 kB]
Get:5 http://packages.dotdeb.org/ wheezy-php56/all php5-gd amd64 5.6.12-1~dotdeb+7.1 [142 kB]
Get:6 http://packages.dotdeb.org/ wheezy-php56/all php5-cli amd64 5.6.12-1~dotdeb+7.1 [2,960 kB]
Get:7 http://mirrors.kernel.org/debian/ wheezy/main libt1-5 amd64 5.1.2-3.6 [174 kB]
Get:8 http://packages.dotdeb.org/ wheezy-php56/all libphp5-embed amd64 5.6.12-1~dotdeb+7.1 [3,044 kB]
Get:9 http://packages.dotdeb.org/ wheezy-php56/all php5-curl amd64 5.6.12-1~dotdeb+7.1 [34.1 kB]
Get:10 http://packages.dotdeb.org/ wheezy-php56/all libapache2-mod-php5 amd64 5.6.12-1~dotdeb+7.1 [3,045 kB]
Get:11 http://packages.dotdeb.org/ wheezy-php56/all php5-common amd64 5.6.12-1~dotdeb+7.1 [763 kB]
Get:12 http://packages.dotdeb.org/ wheezy-php56/all php5 all 5.6.12-1~dotdeb+7.1 [1,192 B]
Fetched 10.6 MB in 7s (1,338 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libvpx1:amd64.
(Reading database ... 16201 files and directories currently installed.)
Unpacking libvpx1:amd64 (from .../libvpx1_1.1.0-1_amd64.deb) ...
Preparing to replace php5-mysql 5.4.41-0+deb7u1 (using .../php5-mysql_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement php5-mysql ...
Preparing to replace php5-mcrypt 5.4.41-0+deb7u1 (using .../php5-mcrypt_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement php5-mcrypt ...
Preparing to replace php5-imap 5.4.41-0+deb7u1 (using .../php5-imap_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement php5-imap ...
Selecting previously unselected package libt1-5.
Unpacking libt1-5 (from .../libt1-5_5.1.2-3.6_amd64.deb) ...
Preparing to replace php5-gd 5.4.41-0+deb7u1 (using .../php5-gd_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement php5-gd ...
Preparing to replace php5-cli 5.4.41-0+deb7u1 (using .../php5-cli_5.6.12-1~dotdeb+7.1_amd64.deb) ...
Unpacking replacement php5-cli ...
Hit http://security.debian.org wheezy/updates InReleaseng .../libphp5-emb
Ign http://mirrors.kernel.org wheezy InRelease
Hit http://security.debian.org wheezy/updates/main amd64 Packages
Hit http://mirrors.kernel.org wheezy Release.gpg
Hit http://mirrors.kernel.org wheezy Release
Hit http://mirrors.kernel.org wheezy/main amd64 Packages
Ign http://apt.readynas.com 6.4.0 InRelease
Hit http://apt.readynas.com 6.4.0 Release.gpg
Hit http://apt.readynas.com 6.4.0 Release
Hit http://apt.readynas.com 6.4.0/updates amd64 Packages
Hit http://apt.readynas.com 6.4.0/apps amd64 Packages
Hit http://apt.readynas.com 6.4.0/main amd64 Packages
Reading package lists... Done

I tried more than two times pydio installation through GUI and once through terminal
I got following error from terminal

dpkg -i pydio_6.0.8_all.deb
Selecting previously unselected package pydio.
(Reading database ... 16261 files and directories currently installed.)
Unpacking pydio (from pydio_6.0.8_all.deb) ...
--2015-08-26 22:54:23--  http://www.dotdeb.org/dotdeb.gpg
Resolving www.dotdeb.org (www.dotdeb.org)... 195.154.242.153
Connecting to www.dotdeb.org (www.dotdeb.org)|195.154.242.153|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5299 (5.2K) [application/octet-stream]
Saving to: ‘dotdeb.gpg’

dotdeb.gpg               100%[====================================>]   5.17K  --.-KB/s   in 0s

2015-08-26 22:54:23 (111 MB/s) - ‘dotdeb.gpg’ saved [5299/5299]

OK
dpkg: dependency problems prevent configuration of pydio:
 pydio depends on php5-pthreads; however:
  Package php5-pthreads is not installed.

dpkg: error processing pydio (--install):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pydio
root@RDNASOS6-X:/tmp# apt-get install php5-threads
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package php5-threads

At the end the pydio GUI just shows of the Readynas Installed app page and

clicking on launch(http://192.168.2.41:7126/index.php) redirects me to

This webpage is not available

ERR_CONNECTION_REFUSED

anc clicking on Settings(https://192.168.2.41/apps/pydio/index.php)
redirects to

Not Found

The requested URL /apps/pydio/index.php was not found on this server.

Apache/2.2.31 (Debian) Server at 192.168.2.41 Port 443 Nothing works! How can I install php5-threads?

super_poussin · ‎2015-08-26

 dpkg --info pydio_6.0.8_all.deb| /frontview/bin/fv-dpkginstall.awk -v allow_not_signed=1

sunsina · ‎2015-08-28

root@RDNASOS6-X:/tmp# dpkg --info pydio_6.0.8_all.deb| /frontview/bin/fv-dpkginstall.awk -v allow_not_signed=1
new debian package, version 2.0.
size 15002072 bytes: control archive=125330 bytes.
36 bytes, 1 lines conffiles
478 bytes, 10 lines control
486820 bytes, 4675 lines md5sums
1757 bytes, 57 lines * postinst #!/bin/sh
1132 bytes, 38 lines * postrm #!/bin/sh
294 bytes, 18 lines * preinst #!/bin/sh
Package: pydio
Version: 6.0.8
Architecture: all
Maintainer: Netgear Inc <readynas@netgear.com>
Installed-Size: 33381
Depends: php5-gd (>= 5.6.4~), php5-mcrypt (>= 5.4.4), libapache2-mod-php5 (>= 5.4.0), php5-curl (>= 5.3~), php5-imap (>= 5.3~), php-pear (>= 5.3~), php5-pthreads, mysql-common (>= 5.5.28), php5-mysql (>= 5.4.4-13), mysql-server (>= 5.1), mysql-client (>= 5.5.0)
Depends: php5-gd (>= 5.6.4~), php5-mcrypt (>= 5.4.4), libapache2-mod-php5 (>= 5.4.0), php5-curl (>= 5.3~), php5-imap (>= 5.3~), php-pear (>= 5.3~), php5-pthreads, mysql-common (>= 5.5.28), php5-mysql (>= 5.4.4-13), mysql-server (>= 5.1), mysql-client (>= 5.5.0)
Found 11 dependants
pkg[1/11]= php5-gd >= 5.6.4~
pkg[2/11]= php5-mcrypt >= 5.4.4
pkg[3/11]= libapache2-mod-php5 >= 5.4.0
pkg[4/11]= php5-curl >= 5.3~
pkg[5/11]= php5-imap >= 5.3~
pkg[6/11]= php-pear >= 5.3~
pkg[7/11]= php5-pthreads
cmd=apt-get -y install php5-pthreads
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package php5-pthreads is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'php5-pthreads' has no installation candidate
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
4 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
E: Can not write log (Is stdout a terminal?) - tcgetattr (25: Inappropriate ioctl for device)
Setting up nut-client (2.7.3-0.netgear2) ...
insserv: warning: script 'leafp2p' missing LSB tags and overrides
[....] Restarting nut-client (via systemctl): nut-client.serviceJob failed. See system journal and 'systemctl status' for details.
failed!
invoke-rc.d: initscript nut-client, action "restart" failed.
dpkg: error processing nut-client (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of nut-server:
nut-server depends on nut-client (= 2.7.3-0.netgear2); however:
Package nut-client is not configured yet.

dpkg: error processing nut-server (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nut:
nut depends on nut-server; however:
Package nut-server is not configured yet.
nut depends on nut-client; however:
Package nut-client is not configured yet.

dpkg: error processing nut (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nut-snmp:
nut-snmp depends on nut (>= 1.4.1-pre1); however:
Package nut is not configured yet.

dpkg: error processing nut-snmp (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
nut-client
nut-server
nut
nut-snmp
E: Sub-process /usr/bin/dpkg returned an error code (1)
fv-dpkginstall.awk: error 3
fv-dpkginstall.awk: success

Retired_Member · ‎2015-09-04

Hello,

I have the same issue, I followed the discussion tried what's on it, and I'm still unable to install Pydio 6.0.8 on a ReadyNAS 516 OS 6.2.4.

Any ideas?

In advance, thank you!

Best.

________________________

I have succesfully install php 5.6, but I still can't install Pydio

root@Grp-M_NAS:~# php --version
PHP 5.6.12-1~dotdeb+7.1 (cli) (built: Aug  8 2015 01:28:25) 
Copyright (c) 1997-2015 The PHP Group
Zend Engine v2.6.0, Copyright (c) 1998-2015 Zend Technologies
    with Zend OPcache v7.0.6-dev, Copyright (c) 1999-2015, by Zend Technologies

Also as advertised, Owncloud is indeed not possible to install anymore

Retired_Member · ‎2015-09-04

ok I found the solution :

nano /etc/apt/sources.list

add

deb http://packages.dotdeb.org wheezy-php56-zts all
deb-src http://packages.dotdeb.org wheezy-php56-zts all

apt-get update

if you get an error like:

GPG error: http://packages.dotdeb.org wheezy-php56 Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY E9C74FEEA2098A6E

then :

wget http://www.dotdeb.org/dotdeb.gpg
apt-key add dotdeb.gpg

and again

apt-get update

then :

apt-get install php5

check you on PHP 5.6.x

php -v

if all's good restart apache:

service apache2 restart

and then try to install again Pydio 6.0.x from the GUI

Best!

sunsina · ‎2015-09-04

Ok,
I tried first to remove the faulty packages nut, leafp2p
by running #apt-get remove --purge nut-server nut-client leafp2p

Then I changed teh sources.list and applied #apt-get update

Then I got #php -v ---->
PHP 5.6.13-1~dotdeb+zts+7.1 (cli) (built: Sep 4 2015 17:39:30)
Copyright (c) 1997-2015 The PHP Group
Zend Engine v2.6.0, Copyright (c) 1998-2015 Zend Technologies
with Zend OPcache v7.0.6-dev, Copyright (c) 1999-2015, by Zend Technologies

So it seems that the PHP is upgraded to version 5.6
BUT
I still have problem installing pydio 6.0.8 via GUI and via dpkg -i

In fact the problem now is the mysqladmin

#dpkg -i pydio_6.0.8_all.deb

...
......
.......
OK
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
dpkg: error processing pydio (--install):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 pydio

I am not sure how to fix this mysqladmin problem?

Any plan for officially upgrading pydio and php?

Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?

Re : Any plan for officially upgrading pydio and php?