how to add no-ip client to ReadyNAS ?

[faidit]

How can I access to the file
/etc/no-ip2.conf
if I use Windows 7 ?

My problem is that the IP is not send anymore by the ReadyNas Duo. I don't understand why and I would like to know if it is really sent and if my router doesn't let it go out.
How can I see if the information is sent ?

Thanks

[eton]

Thanks super-poussin for this!

Dns-O-Matic has got problems with No-IP and ddclient was not easy to configure and might not even work with No-IP.

Notes:
I had to click save in FrontView twice to make the NOIP add-on start.

According to media/no-ip.log
-U = minutes

[eton]

I have uesd no-ip ad-on for a while but it does not seem to work. After a while I get a message from NO-IP that I have not updated my address and they will remove it in 14 days. There is no problem med my connection. DNS-o-Matic forks perfectly with dyndns.org.

[shelis]

I have instal http://www.readynas.com/contributed/sup ... IP_1.1.bin

but system can'not start the service

I put parameters in line .

Please describe what should I do step by step

Best regards Tom

[eton]

No-IP is just a mess. I don't use their services nor the client anymore.

But for your information here is an old log file from the no-ip client. Off course it didn't work for me either.

Can't locate configuration file /usr/local/etc/no-ip2.conf. (Try -c). Ending!


USAGE: no-ip [ -C [ -F][ -Y][ -U #min]
	[ -u username][ -p password][ -x progname]]
	[ -c file][ -d][ -D pid][ -i addr][ -S][ -M][ -h]

Version Linux-2.1.9
Options: -C               create configuration data
         -F               force NAT off
         -Y               select all hosts/groups
         -U minutes       set update interval
         -u username      use supplied username
         -p password      use supplied password
         -x executable    use supplied executable
         -c config_file   use alternate data path
         -d               increase debug verbosity
         -D processID     toggle debug flag for PID
         -i IPaddress     use supplied address
         -I interface     use supplied interface
         -S               show configuration data
         -M               permit multiple instances
         -K processID     terminate instance PID
         -z               activate shm dump code
         -h               help (this text)

Configuration file '/etc/no-ip2.conf' is in use by process 1287.
Ending!

One no-ip process is already active,
and the multiple instance flag (-M) is not set.

Auto configuration for Linux client of no-ip.com.

Multiple network devices have been detected.

Please select the Internet interface from this list.

By typing the number associated with it.
0	eth0
1	LeafNets
You have entered an incorrect username
	-or-
an incorrect password for this username.

USAGE: no-ip [ -C [ -F][ -Y][ -U #min]
	[ -u username][ -p password][ -x progname]]
	[ -c file][ -d][ -D pid][ -i addr][ -S][ -M][ -h]

Version Linux-2.1.9
Options: -C               create configuration data
         -F               force NAT off
         -Y               select all hosts/groups
         -U minutes       set update interval
         -u username      use supplied username
         -p password      use supplied password
         -x executable    use supplied executable
         -c config_file   use alternate data path
         -d               increase debug verbosity
         -D processID     toggle debug flag for PID
         -i IPaddress     use supplied address
         -I interface     use supplied interface
         -S               show configuration data
         -M               permit multiple instances
         -K processID     terminate instance PID
         -z               activate shm dump code
         -h               help (this text)

Auto configuration for Linux client of no-ip.com.

Multiple network devices have been detected.

Please select the Internet interface from this list.

By typing the number associated with it.
0	eth0
1	LeafNets
Only one host [stilarkivet.myftp.org] is registered to this account.
It will be used.

New configuration file '/etc/no-ip2.conf' created.


Auto configuration for Linux client of no-ip.com.

Multiple network devices have been detected.

Please select the Internet interface from this list.

By typing the number associated with it.
0	eth0
1	LeafNets
You have entered an incorrect username
	-or-
an incorrect password for this username.

USAGE: no-ip [ -C [ -F][ -Y][ -U #min]
	[ -u username][ -p password][ -x progname]]
	[ -c file][ -d][ -D pid][ -i addr][ -S][ -M][ -h]

Version Linux-2.1.9
Options: -C               create configuration data
         -F               force NAT off
         -Y               select all hosts/groups
         -U minutes       set update interval
         -u username      use supplied username
         -p password      use supplied password
         -x executable    use supplied executable
         -c config_file   use alternate data path
         -d               increase debug verbosity
         -D processID     toggle debug flag for PID
         -i IPaddress     use supplied address
         -I interface     use supplied interface
         -S               show configuration data
         -M               permit multiple instances
         -K processID     terminate instance PID
         -z               activate shm dump code
         -h               help (this text)

Auto configuration for Linux client of no-ip.com.

Multiple network devices have been detected.

Please select the Internet interface from this list.

By typing the number associated with it.
0	eth0
1	LeafNets
Only one host [stilarkivet.myftp.org] is registered to this account.
It will be used.

New configuration file '/etc/no-ip2.conf' created.


Auto configuration for Linux client of no-ip.com.

Only one host [stilarkivet.myftp.org] is registered to this account.
It will be used.

New configuration file '/etc/no-ip2.conf' created.


Configuration file '/etc/no-ip2.conf' is in use by process 1772.
Ending!

One no-ip process is already active,
and the multiple instance flag (-M) is not set.

Instead I would reccomend WhoCares DDclient and some other service than No-IP.
Check out my research here: viewtopic.php?f=36&t=62612