Este tema fue marcado como resuelto y cerrado a nuevas publicaciones debido a la inactividad. Esperamos que se una a la conversación publicando en un tema abierto o iniciando uno.
Resulta, que tengo un netgear r7800, y siempre ha funcionado bien, pero desde hace un tiempo, llevo peleando a ver si consigo saber por qué me pasa esto.
La cuestión, es que, tengo el control de accesos activado y así filtro por mac, todos los dispositivos que se conectan a mi red. PERO cada vez que reinicio el router por cualquier cosa, el control de accesos SE DESACTIVA y tengo que volver a activarlo manualmente.
Tengo un amigo que tiene este mismo router y esto no le pasa, con la misma versión.
Ya he probado a restaurar de fabrica, a cambiar de versión de firmware, a poner opendwrt para volver al firmware de stock, por si se hubiera quedado alguna configuración colgando, etc. ya no se que mas probar.
It turns out, I have a Netgear R7800, and it has always worked well, but for some time, I have been fighting if I know why this happens to me.
The question is that, I have activated access control and thus filter by Mac, all devices that connect to my network. But every time the router restarts for anything, access control is deactivated and I have to activate it manually.
I have a friend who has this same router and this does not happen, with the same version.
I have already tried to restore factory, to change firmware version, to put OPENDWRT to return to stock firmware, in case some configuration had been left hanging, etc. I don't know what else to try.
It turns out, I have a Netgear R7800, and it has always worked well, but for some time, I have been fighting if I know why this happens to me.
The question is that, I have activated access control and thus filter by Mac, all devices that connect to my network. But every time the router restarts for anything, access control is deactivated and I have to activate it manually.
I have a friend who has this same router and this does not happen, with the same version.
I have already tried to restore factory, to change firmware version, to put OPENDWRT to return to stock firmware, in case some configuration had been left hanging, etc. I don't know what else to try.
