× Introducing the Orbi 970 Series Mesh System with WiFi 7 technology. For more information visit the NETGEAR Press Room.
Orbi WiFi 7 RBE973
Reply

WNR2000v5 shows the Current Time: Wednesday, Dec 31, 1969 16:06:18 above log window.

txnintn
Aspirant

WNR2000v5 shows the Current Time: Wednesday, Dec 31, 1969 16:06:18 above log window.

Firmware version updated from v1.0.0.72 to v1.0.0.76 no change.

Check out the current time above the log window.

Anyway to check the router real time / date?

txnintn

 

 

WNR2000v5_time.jpg

 

Model: WNR2000v5|N300 WiFi Router
Message 1 of 4

Accepted Solutions
txnintn
Aspirant

Re: WNR2000v5 shows the Current Time: Wednesday, Dec 31, 1969 16:06:18 above log window.

Ok fixed it.  I went to Security Schedule, Time zone was Pacific, I corrected it, then checked automatically adjust for daylight savings time and appied.  Now the time and date over the log is correct.  Weird bug.

View solution in original post

Message 4 of 4

All Replies
antinode
Guru

Re: WNR2000v5 shows the Current Time: Wednesday, Dec 31, 1969 16:06:18 above log window.

> Operating Mode: Access Point

 

   How, exactly, is the WNR2000v5-as-WAP connected to the main-router
LAN?  (Hint: If a device has different types of Ethernet ports, then
"connected to device" is not enough detail.)

 

   Visit http://netgear.com/support , put in your model number, and look
for Documentation.  Get the User Manual (at least).  Read.  Look for
"Use the Router as a Wireless Access Point".  How closely does your
configuration agree with the documented configuration?

Message 2 of 4
txnintn
Aspirant

Re: WNR2000v5 shows the Current Time: Wednesday, Dec 31, 1969 16:06:18 above log window.

My main wireless router is a NetGear WNDR4500v2, it shows the correct time and date in the log files.  The only LAN cable plugged into the WNDR4500v3 goes to the WNR2000v5's yellow port labeled internet.  I have two desktops plugged into the WNR2000v5's LAN ports.

 

AP is manually configured  simular to the article How do I change my NETGEAR router to AP mode after setting it up? 

 

The WNDR4500v2 is DHCP 192.168.x.1) and the WNR2000v5 is on the same subnet, DCHP off and ip is 192.168.x.250.

Txnintn

Message 3 of 4
txnintn
Aspirant

Re: WNR2000v5 shows the Current Time: Wednesday, Dec 31, 1969 16:06:18 above log window.

Ok fixed it.  I went to Security Schedule, Time zone was Pacific, I corrected it, then checked automatically adjust for daylight savings time and appied.  Now the time and date over the log is correct.  Weird bug.

Message 4 of 4
Discussion stats
  • 3 replies
  • 1457 views
  • 0 kudos
  • 2 in conversation
Announcements

Orbi WiFi 7