Enable / Disable POE per port via ssh / telnet

[DougShuffield]

I would like to know the command sequence to enable / disable POE on a port by port basis.  In the user interface this is the admin mode column.  I have not been able to find a full description of the command line interface for this switch.  I have successfully enabled and connected to my GS752TP via ssh and can get into config mode.  From there I can list the ports with 'do show power inline' but I have not been able to determine how to enable / disable poe on a specific port.

Any help would be appreciated.

Doug

[schumaku · Accepted solution]

Instead of using the (unsupported, well possible incomplete, ...) CLI access use SNMP -> https://community.netgear.com/t5/Smart-Plus-Click-Switches/Switch-GS728TP-POE-Admin-enable-disable-v...

The GS727TP is a Smart Managed Pro switch, not a Managed Switch -> Smart / Plus / Click Switches (easy to overlook on the brilliantly bad community structure @ChristineT  @Christian_R )

[schumaku · Accepted solution]

Instead of using the (unsupported, well possible incomplete, ...) CLI access use SNMP -> https://community.netgear.com/t5/Smart-Plus-Click-Switches/Switch-GS728TP-POE-Admin-enable-disable-v...

The GS727TP is a Smart Managed Pro switch, not a Managed Switch -> Smart / Plus / Click Switches (easy to overlook on the brilliantly bad community structure @ChristineT  @Christian_R )