Firmware download GSS116E only shows Prosafe Plus config utility

[jlanka]

GSS116E, when I click on firmware and software downloads it only shows me the prosafe config utility.  Where is the firmware?

[DaneA · Accepted solution]

@jlanka,

I just want to inform you that firmware v1.0.0.5 for the GSS116E has been posted.  Kindly access it here.

Regards,

DaneA

NETGEAR Community Team

[DaneA]

Hi jlanka,

Welcome to the community! 🙂 

I have already reported about this concern.  Thanks for posting it. 

I will post here an update as soon as I got a feedback.

Regards,

DaneA

NETGEAR Community Team

[DaneA]

@jlanka,

Just an update.  There will be a new firmware that will be posted soon for the GSS116E.  

Regards,

DaneA

NETGEAR Community Team

[Retired_Member]

Hi jlanka,

Welcome to NETGEAR Community, below are firmware downloading link, can you help try?

GS116Ev2 v2.0.1.26

GS116, open Browser and go to http://downloadcenter.netgear.com/, enter GSS116E, then click "Firmware version 1.00.21" to download (see picture)

[jlanka]

No joy, I only see this:

[schnax]

We're looking for GSS116E not GS116E

[jlanka]

Does the GS116E firmware work on the GSS116E ?

[jlanka]

crickets...

[DaneA]

@jlanka,

The firmware for the GS116E will not work on the GSS116E.  The GSS116E might get brick if you try to upload a firmware from other switches.

Regards,

DaneA

NETGEAR Community Team

[jlanka]

OK thanks.  So when will firmware for the GSS116E be available?

[DaneA]

@jlanka,

There is no ETA yet on when the new firmware for the GSS116E switch will be released.  I will post here if ever I got an update. 

Regards,

DaneA

NETGEAR Community Team

[DaneA · Accepted solution]

@jlanka,

I just want to inform you that firmware v1.0.0.5 for the GSS116E has been posted.  Kindly access it here.

Regards,

DaneA

NETGEAR Community Team

[jlanka]

Thanks very much

[DaneA]

@jlanka,

I just want to follow-up on this.  Were you able to download firmware v1.0.0.5 and upload it to your GSS116E switch? 

If ever you were able to upload firmware v1.0.0.5 to your GSS116E and everything is working fine, I encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The NETGEAR Community looks forward to hearing from you and being a helpful resource in the future!

Regards,

DaneA

NETGEAR Community Team

[Eaglehawk]

This has happened again, is there a reason why the 1.0.0.5 firmware was pulled? (I've already upgraded, but I'm concerned about why it's suddenly disappeared)

[JohnC_V]

@Eaglehawk,

This post is too old already. Kindly create a new thread.

Regards,