VLAN routing on XS728T not possible?

[tantony]

I'm trying to do VLAN routing on a ProSAFE XS728T.  When I go into Routing, VLAN, VLAN Routing, and add VLAN and IP address, I loose connection, and becomes unresponsieve.  All the ports on this switch is still on VLAN 1.

I tried the same thing on a ProSAFE XS716T, and it works.  

I had Netgear tech remote in and look, and he was getting the same results.

https://kb.netgear.com/24755/How-do-I-configure-VLAN-Routing-on-a-smart-switch

According to this article, XS728T should be able to do VLAN routing.

The switch is still on the factory default 192.168.0.239.  The firmware is up to date.

I tried to do this on another 728T with same results.

[tantony · Accepted solution]

Figured out the solution.  Not sure why this matters, but after changing the default 192.168.0.239 to static, I was able to add VLAN routing.

[tantony · Accepted solution]

Figured out the solution.  Not sure why this matters, but after changing the default 192.168.0.239 to static, I was able to add VLAN routing.