Responder

Ayuda configuración Switch GS716Tv3

PouClar
Aspirant

Ayuda configuración Switch GS716Tv3

Buenos días, primero que nada presentarme:

soy profesor de un centro de educación secundaria y acudo a la comunidad Netgear solicitando ayuda. La cuestión es la siguiente:

tenemos un Switch GS716Tv3, por estrenar y que no sabemos configurar. La idea era pedir a alguien del foro si tiene algún aparato del mismo modelo en funcionamiento, y nos pudiera pasar una copia de la configuración para poder volcar y así poder hacer uso del mismo.

No necesitamos ninguna configuración especial, simplemente la configuración del aparato básica para poder instalar y poder tener servicio en los 16 puertos de salida.

Si hay algun compañero del foro que estuviera dispuesto, nos haría un gran favor.

 

Muchas gracias de antemano.

 

Saludos.1.jpeg2.jpeg

Model: GS716Tv3|ProSafe 16 ports Gigabit Smart switch
Mensaje 1 de 6

Soluciones aceptadas
schumaku
Guru

Re: Ayuda configuración Switch GS716Tv3

Start your adventure on the switch here https://www.netgear.es/support/product/GS716Tv3.aspx 

 

Firmware downloads are under [Descargas] https://www.netgear.es/support/product/GS716Tv3.aspx#download remember the firmware is coming in a zip which needs to be expanded (two files, firmware archive and some release notes).

 

https://www.downloads.netgear.com/files/GDC/GS716TV3/GS716Tv3_GS724Tv4_GS748Tv5_SWA_25Sept2013.pdf - p. "HTTP File Upload" - Maintenance > Upload > HTTP File Upload  You can upload the firmware image (nickname "Archive") into the image1 section for simplicity, because your system is new, and the image1 is defined as the default boot section. (yes, all confusing for historical reasons ref. up- vs. download for example)

 

Documentation is available on [documentación] https://www.netgear.es/support/product/GS716Tv3.aspx#download (except from the installation guide it's all in English only when I have it right).

 

Regards

-Kurt (from Switzerland)

 

PS. My Spanish is very limited, reading is ok - but no chance to write something meaningful 8-)

Ver la solución en mensaje original publicado

Mensaje 4 de 6

Todas las respuestas
schumaku
Guru

Re: Ayuda configuración Switch GS716Tv3

There is not much required for a simple set-up - you don't need to grab any kind of pre-made configurations: 

 

  • Firmware update
  • Set a strong password

...and up you go to start with!

Mensaje 2 de 6
PouClar
Aspirant

Re: Ayuda configuración Switch GS716Tv3

Buenos días, primero que nada darte las gracias por contestar.

Creo que este Switch es gestionable, y según tus indicaciones, si actualizo el Firmware no necesito ningún tipo de configuración para funcionar. He entendido bien?

Si esto es así, puede indicarme la pestaña donde se actualiza el Firmware cuando accedo al mismo? Descargo el nuevo Firmware de Netgear.com?

Muchas gracias por tu ayuda.

Saludos







 

Model: GS716Tv3|ProSafe 16 ports Gigabit Smart switch
Mensaje 3 de 6
schumaku
Guru

Re: Ayuda configuración Switch GS716Tv3

Start your adventure on the switch here https://www.netgear.es/support/product/GS716Tv3.aspx 

 

Firmware downloads are under [Descargas] https://www.netgear.es/support/product/GS716Tv3.aspx#download remember the firmware is coming in a zip which needs to be expanded (two files, firmware archive and some release notes).

 

https://www.downloads.netgear.com/files/GDC/GS716TV3/GS716Tv3_GS724Tv4_GS748Tv5_SWA_25Sept2013.pdf - p. "HTTP File Upload" - Maintenance > Upload > HTTP File Upload  You can upload the firmware image (nickname "Archive") into the image1 section for simplicity, because your system is new, and the image1 is defined as the default boot section. (yes, all confusing for historical reasons ref. up- vs. download for example)

 

Documentation is available on [documentación] https://www.netgear.es/support/product/GS716Tv3.aspx#download (except from the installation guide it's all in English only when I have it right).

 

Regards

-Kurt (from Switzerland)

 

PS. My Spanish is very limited, reading is ok - but no chance to write something meaningful 8-)

Mensaje 4 de 6
RaoD
NETGEAR Moderator

Re: Ayuda configuración Switch GS716Tv3

Hola @PouClar,

 

¡Bienvenido en la Community NETGEAR!

 

Le aconsejo en seguir todas la indicaciones que le ha dado el usuario @schumaku.

 

Como primer paso, si necesario, tiene que actualizar el dispositivo con el último firmware disponible.

 

Y luego tiene todas las informaciones para configurar su dispostivo en las Guías de usuario y documentación que encuentra en la pagina de soporte de GS716Tv3, último enlace proporcionado. 🙂

 

Gracias @schumaku por ayudar la Community! 🙂

 

Saludos,

 

Raony
Equipo de NETGEAR 

Mensaje 5 de 6
PouClar
Aspirant

Re: Ayuda configuración Switch GS716Tv3

Buenos días,

he seguido todos los pasos y me ha quedado solucionado.

 

Gracias

Mensaje 6 de 6
Estadísticas de la conversación
  • 5 respuestas
  • 1419 vistas
  • 2 kudos
  • 3 en conversación