This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
Which Power Supply is the one for the GS108v2 & GS108v3
Greetings! I have two switches, a GS108v2 & a GS108v3 and two power supplies with different specs. I've looked at the online documentation and on the back of the switches and see that the power supply input plug has above it (on both) "12V, 1A".
Re: Which Power Supply is the one for the GS108v2 & GS108v3
There's no need to be concerned. You can safely use a 1.5 A power supply on a device that only needs 1 A. The device will only use as much current as it needs.
On the flip side, it would be dangerous to use a power supply with a lower amperage rating than what the device needs.
And in all cases, the voltage of the power supply MUST match what the device needs.
Re: Which Power Supply is the one for the GS108v2 & GS108v3
There's no need to be concerned. You can safely use a 1.5 A power supply on a device that only needs 1 A. The device will only use as much current as it needs.
On the flip side, it would be dangerous to use a power supply with a lower amperage rating than what the device needs.
And in all cases, the voltage of the power supply MUST match what the device needs.
I encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The NETGEAR Community looks forward to hearing from you and being a helpful resource in the future!
