Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Backup job creates ISO file on USB target device
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-02-20
01:43 PM
2015-02-20
01:43 PM
Backup job creates ISO file on USB target device
Trying to resolve an unexpected backup result. I'm using Frontview on the ReadyNAS 3200 v1 [X-RAID2], Firmware: RAIDiator 4.2.27. I've created a few jobs so far and get the expected result. But, there is one that I can't figure out:
Job001 is from an iSCSI target named "iso" to a share on a connected USB storage device.
The "iso" iSCSI target is mounted as a datastore on VMware. This datastore contains several ISO images and a few VMware template VM's. In all, there are about 10 ISO images and another 15 or so files related to VMware templates.
The USB device (USB_HDD_1) has two partitions. The share (USB_HDD_1_2) was created on the 2nd partition which is configured as NTFS.
Backup Job001 runs and completes, but only creates 2 files on the USB device:
iso~0 (about 600GB)
iso~0.conf (about 1k)
Here is the job log:
FULL Backup started. Fri Jan 30 16:49:20 EST 2015
Job: 001
Protocol: local
Source: [iso~0]/
Destination: [USB_HDD_1_2]//BU_ISO
`iso~0' -> `/USB_HDD_1_2//BU_ISO/iso~0'
Backup finished. Fri Jan 30 23:20:53 EST 2015
Any idea what is happening?
Job001 is from an iSCSI target named "iso" to a share on a connected USB storage device.
The "iso" iSCSI target is mounted as a datastore on VMware. This datastore contains several ISO images and a few VMware template VM's. In all, there are about 10 ISO images and another 15 or so files related to VMware templates.
The USB device (USB_HDD_1) has two partitions. The share (USB_HDD_1_2) was created on the 2nd partition which is configured as NTFS.
Backup Job001 runs and completes, but only creates 2 files on the USB device:
iso~0 (about 600GB)
iso~0.conf (about 1k)
Here is the job log:
FULL Backup started. Fri Jan 30 16:49:20 EST 2015
Job: 001
Protocol: local
Source: [iso~0]/
Destination: [USB_HDD_1_2]//BU_ISO
`iso~0' -> `/USB_HDD_1_2//BU_ISO/iso~0'
Backup finished. Fri Jan 30 23:20:53 EST 2015
Any idea what is happening?
Message 1 of 1
Labels: