This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
CASE# 25884573 - Updating RN102 to 6.4 bricked it.
Wish I would have browsed the forum before updating my RN102 to 6.4. It won't boot after updating to 6.4 automatically via the browser.
When I push the power button, nothing happens. If I hold the power button I hear the disks spin up but not lights come on. The second I release the power button it dies again. I cannot access the boot menu or the USB Recovery.
Re: CASE# 25884573 - Updating RN102 to 6.4 bricked it.
Hi fbmachines,
Thank you for sharing this issue in the community. Kindly confirm if the steps that you have followed for the USB boot recovery process is the same as the steps found on this article.
Re: CASE# 25884573 - Updating RN102 to 6.4 bricked it.
Hey Brian,
Yes. That is the KB I used as reference for creating the USB flash drive. I tried 3 different flash drives and also tried 6.4 as well as 6.2.5 as the image.
No response while trying to boot. Like I said, when I press the power button nothing but when I hold it, the drive spin up until I release the button.
I also tried a spare blank HDD installed with the USB recovery too.
Re: CASE# 25884573 - Updating RN102 to 6.4 bricked it.
Hi fbmachines,
I am glad that the USB boot recovery procedure fixed the problem. Continue to support the community by posting questions, possible issues, idea sharing and reply to topics that interests you.
