× NETGEAR will be terminating ReadyCLOUD service by July 1st, 2023. For more details click here.
Orbi WiFi 7 RBE973
Reply

Can´t get acces to media [SOLVED]

kiiilden
Aspirant

Can´t get acces to media [SOLVED]

Hi there.

I just bought a Readynas duo, running firmware RAIDiator 4.1.10
I´ve installed it following the manual. but i can´t get acces to media or backup ?
When i´m in the sharing menu, its say to both, CIFS DISABLED. i cant add a Hosts allowed access (if that is what im missing)
i dont know, i tried for hours now, and i cant even download anything from transmission :s
Message 1 of 8
kiiilden
Aspirant

Re: Can´t get acces to media

cant nobody help ??
Message 2 of 8
mdgm-ntgr
NETGEAR Employee Retired

Re: Can´t get acces to media

Message 3 of 8
kiiilden
Aspirant

Re: Can´t get acces to media

it doenst help me. verytime i try to change something in share settings, it just go back to the default :s i cant change anything 😞
Message 4 of 8
mdgm-ntgr
NETGEAR Employee Retired

Re: Can´t get acces to media

Go to System > Config Backup. What happens if you try to download a Config Backup?
Message 5 of 8
GoggiP
Aspirant

Re: Can´t get acces to media

CIFS DISABLED ? I am not sure how this happened, my best guess is enable it again from frontview. Go to Services> Standard Protocol services >Tick the box CIFS and click apply. If it is already ticked then untick it and click apply then tick it again and click apply. Now go to the share and check if CIFS is enabled. This option is under shares> share listings > change default access to read/write on the share. Otherwise this sounds like a corrupt samba file on the NAS. Try doing an OS reinstall as per this link, http://www.readynas.com/kb/faq/boot/how ... _boot_menu. This will default the access on the share.
Message 6 of 8
kiiilden
Aspirant

Re: Can´t get acces to media

mdgm wrote:
Go to System > Config Backup. What happens if you try to download a Config Backup?

when i check "everything" and press download. Nothing happens ?
EDIT: It seems like i can download all configs, except Data Volumes

GoggiP wrote:
CIFS DISABLED ? I am not sure how this happened, my best guess is enable it again from frontview. Go to Services> Standard Protocol services >Tick the box CIFS and click apply. If it is already ticked then untick it and click apply then tick it again and click apply. Now go to the share and check if CIFS is enabled. This option is under shares> share listings > change default access to read/write on the share. Otherwise this sounds like a corrupt samba file on the NAS. Try doing an OS reinstall as per this link, http://www.readynas.com/kb/faq/boot/how_do_i_use_the_boot_menu. This will default the access on the share.



The tick was on, its not that. ive tried to untick and tick it again, no help. ill try to make a os reinstal. here is a picute.
Message 7 of 8
kiiilden
Aspirant

Re: Can´t get acces to media

PROBLEM SOLVED:
could not factory reset it by holding reset for 30 sec. BUT, in frontview i could, and now it works !
Thanks to everybody for the time they spent !
Message 8 of 8
Top Contributors
Discussion stats
  • 7 replies
  • 1586 views
  • 0 kudos
  • 3 in conversation
Announcements