Can't get back to x-raid after replacing failed disk

[grey_wolfnz]

My ReadyNAS was in x-raid mode with 5T|5T|6T|3T configuration. The disk in slot 1 failed, so I replaced it with a 6TB disk. Everything resynced OK, but after the resync my volume is no longer in x-raid.

Trying to turn X-raid back on results in an error message. 

This is annoying because the volume should have xpanded by 1TB because I now have a mirror for the additional 1TB on the 6TB disk, but it didn't do so.

btw - I tried rebooting, but it didn't help.

[StephenB]

What firmware are you running?

[grey_wolfnz]

6.9.3

[Marc_V]

Hi @grey_wolfnz

Can you send in the logs? It might need Support assistance through NETGEAR Support.

Regards