× NETGEAR will be terminating ReadyCLOUD service by July 1st, 2023. For more details click here.
Orbi WiFi 7 RBE973
Reply

New Disk Sync is stuck at 92%

stagi
Aspirant

New Disk Sync is stuck at 92%

I swapped out a drive yesterday for a new drive. It first took about 4 hours to initialize and then started to Sync. About 7 hours later I checked and it showed 92% 18 minutes left to complete (looking at RAIDAR) on the ReadyNas the drive is still blinking green. It has been stuck at this 92% for about an hour now. I also can't access Front View or the ReadyNas at all it just hangs.

Any help would be very much appreciated!

Thanks,
Mark
Message 1 of 5
stagi
Aspirant

Re: New Disk Sync is stuck at 92%

Still stuck, anyone have an idea on what to do?
Message 2 of 5
PapaBear1
Guide

Re: New Disk Sync is stuck at 92%

Which NAS do you have?

What brand and model of drives do you have?

What version of RAIDiator?

Have you opened a tech support case?

Do you have a current and complete backup?
Message 3 of 5
stagi
Aspirant

Re: New Disk Sync is stuck at 92%

NV+ seagate baracudda drives 2 1TB and 2 2TB (latest add on was a 2TB to replacee a 1 TB).
no tech support case yet was hoping for a easy answer
and no full backup (at least in one space, this is my backup of many drives)
Message 4 of 5
PapaBear1
Guide

Re: New Disk Sync is stuck at 92%

Ok, so the unit is not your primary file source, it is the backup unit.

One thing to try is to shut down the unit, remove the new drive you are installing, connect it to a motherboard SATA port and run SeaTools on it.

It would be helpful to know the model numbers of the drives.
Message 5 of 5
Top Contributors
Discussion stats
  • 4 replies
  • 917 views
  • 0 kudos
  • 2 in conversation
Announcements