This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
No volumes exits, remove inactive volumes to use the disk. Disk #2,3,4.
All volumes on the readynas are gone. Further I get a message to "Remove inactive volumes to use the disk. disk #2, 3, 4. Can someone please help me get stated with this, I have uploaded logs to netgear support but have not heard anything back from them; do they not respond to queries?
I checked the System_log-ras-readynas-20170815-113623 as I believe that is the latest. It appears your ReadyNAS 104 is running 6.7.5 firmware. I found almost all of your disks have gone bad.
ATA Error Count: 36701 Reallocated Sectors: 7 Reallocation Events: 7 Spin Retry Count: 0 Current Pending Sector Count: 0
The disks in channel 2 and 3 are having real trouble while the first disk has pending error. I suggest you get a data recovery service already. There are some data recovery services available on the Internet, Netgear does have too but this is beyond the support scope that you may need to purchase the data recovery service contract.
I checked the System_log-ras-readynas-20170815-113623 as I believe that is the latest. It appears your ReadyNAS 104 is running 6.7.5 firmware. I found almost all of your disks have gone bad.
ATA Error Count: 36701 Reallocated Sectors: 7 Reallocation Events: 7 Spin Retry Count: 0 Current Pending Sector Count: 0
The disks in channel 2 and 3 are having real trouble while the first disk has pending error. I suggest you get a data recovery service already. There are some data recovery services available on the Internet, Netgear does have too but this is beyond the support scope that you may need to purchase the data recovery service contract.
You are most welcome. If your issue is now resolved, we encourage you to mark the appropriate reply as the “Accept as Solution” or post what resolved it and mark it as solution so others can be confident in benefiting from the solution.
The Netgear community appreciates your contribution to the community!
