This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
RN314 – ReadyNAS 300 Series 4- Bay Model / Version: RN314 - Encryption
Afternoon,
I have been fighting with a R314 ReadyNas over the last few days in an attempt to encrypt the hard drives using a USB stick.
From checking the R314 is not detecting the USB stick being plugged into the device and being removed on the status screen which is a first sign of problems.
Ive formatted the memory stick as Fat32, updated the software to the latest BETA version 03/01/2019 and performed a factory reset.
Each time when creating the volume (with xraid disabled) the NAS does not detect that a usb drive is plugged in.
Any ideas? Does the R314 support this type of setup (ive recently performed the same with no problems on a RN204)
Re: RN314 – ReadyNAS 300 Series 4- Bay Model / Version: RN314 - Encryption
Hi ashturnerit,
We’d greatly appreciate hearing your feedback letting us know if the information we provided has helped resolve your issue or if you need further assistance.
If your issue is now resolved, we encourage you to mark the appropriate reply as the “Accept as Solution” or post what resolved it and mark it as solution so others can be confident in benefiting from the solution.
The NETGEAR community looks forward to hearing from you and being a helpful resource in the future!
