This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
Hi All... Im trying to backup one NAS to another NAS using RSync but it just keeps failing.
So the main NAS is a ReadyNAS 2304 backu to ReadyNAS 2120 v2. oth have the same firmware versions. I created the backup job NOT using SSH but get this error message below:
Backup Job Name: job_001 Backup Job Type: Incremental Protocol: rsync Backup Source: [STORAGE]/ Backup Destination: [remote:rsync]/READYNAS-2120.local::RN2304-BACKUP/BACKUP Backup Start Time: Mon Dec 03 2018 12:20:41 AM Backup Finish Time: Mon Dec 03 2018 12:20:48 AM Backup Status: Fail: Failure during copy.
Failed to run rsync, return rc 10 'rsync' command returns rc=10
sending incremental file list rsync: read error: Connection reset by peer (104) rsync error: error in socket IO (code 10) at io.c(794) [sender=3.1.3]
No matter what options I try it fails.... Please help?
Okay so what I did was from the host (backup) NAS I created a BACKUP shared folder and enabled RSync, but I made sure that READ/WRITE was selected in the security tab....
Yes RSync is active on both NAS's, and noth find each other in the setup.....
What I nocticed is that it gives an error if I choose the ROOT of the drive but it works only if I choose a Folder. I dont want to choose seperate folders but the whole drive.
If I make the path just {name of volume} I get a permission error.
Okay so what I did was from the host (backup) NAS I created a BACKUP shared folder and enabled RSync, but I made sure that READ/WRITE was selected in the security tab....
