- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
ReadyDR unreliable / random failures (Error 255)
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
ReadyDR unreliable / random failures (Error 255)
Hello Community,
I have problems with ReadyDR-Jobs failing randomly with error 255.
Here's the setup:
Two RN3138 with identical disk setup, FW 6.9.3.
The first (storage02) ist the active NAS and provides usershares and a data-share for the company( about 46 shares in total). The second one (storage03) is only a readydr target.
On storage02 snapshots are taken every hour with smart-setting enabled..
Storage02 is connected to the company network via eth0. Storage02 and storage03 have a dedicted connection via eth3 and dedicated switch for the readydr-jobs. All connections are LAN, no internet/vpn involved.
Readydr-jobs are configured as push-jobs from storage02 to storage03 every hour.
At least once a day one ore more readydr-jobs fail with
"ReadyDR-Auftrag fehlgeschlagen: Unbekannter Fehler 255 [<job-name>]"
(roughly translated: ReadyDR-Job failed: Unkown error 255[<job-name>])
Last two days it were sometimes more than half the jobs which failed
Any help is highly appreciated.
Sven
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ReadyDR unreliable / random failures (Error 255)
Look at the ethernet statistics on both NAS (which are in network_settings.log in the log zip file). Perhaps also look at the ethernet stats on the switches on the path.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ReadyDR unreliable / random failures (Error 255)
Thank you,
I followed your advice and this is the result:
ethernet statistics storage02:
eth3 Link encap:Ethernet HWaddr e8:fc:af:e6:e7:a3 inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::eafc:afff:fee6:e7a3/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4953775625 errors:0 dropped:0 overruns:0 frame:0 TX packets:10754960373 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:578561054079 (538.8 GiB) TX bytes:15379770239021 (13.9 TiB) Memory:dfe00000-dfe1ffff
storage03:
eth3 Link encap:Ethernet HWaddr b0:b9:8a:43:c3:23 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::b2b9:8aff:fe43:c323/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:31759593 errors:0 dropped:0 overruns:0 frame:0 TX packets:3936203 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:46351098088 (43.1 GiB) TX bytes:375613535 (358.2 MiB) Memory:dfe00000-dfe1ffff
I can not see any errors. Network looks fine to me.
Switch is unmanaged, no logs available.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ReadyDR unreliable / random failures (Error 255)
@IX wrote:
I can not see any errors. Network looks fine to me.
It looks fine to me too. I suggested checking this because there was a recent poster with the same error, and in his case the network connection was dropping.
I think you'll need Netgear's help to diagnose this. Perhaps PM @mdgm-ntgr or another mod here, and ask them if they are willing to analyze your logs.
If you are using the NAS hostname in the ReadyDR job(s), then perhaps you could try switching to the IP address.
BTW, if you aren't using ipv6 on your network, I suggest disabling the protocol in the two NAS. Sometimes Windows 10 will use the ipv6 local links, and performance can suffer if that happens.