I got a new ReadyNAS Duo v2 everything works perfect but not the speed of getting files and placing files in the ReadyNAS. With cable i get 11MB/S and wireless i get 2MB/S. I got the newest version of the ReadyNAS
Model: ReadyNAS Duo v2 Firmware: RAIDiator 5.3.7 Geheugen: 256 MB Apparaattijd: December 22, 2012 11:18:59 AM RAID-type: X-RAID2
Here is a picture of my setup. Please help me. i got a 300MB Router with gigabyte ports.
Well the TL-WR1043ND router is gigabit capable make sure you are using cat5e or cat6 ethernet cable between router and ReadyNAS i presume you are going by the picture above it looks like you are using the cable that came supplied with the ReadyNas, to check if you are connected at gigabit speed log in to the dashboard click the configure tab at the top left then click on the info tab under the system tab and click the download all logs button, then open the zip file that you downloaded and look in network_settings.log scroll to the bottom and you should see the settings below i have highlighted in red the connection speed.
Edit: As StephenB asked above is the PC you are connecting via cable gigabit capable ?
Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: internal Auto-negotiation: on Link detected: yes
Sharing speed is 1GPBS, Its all fine. First i upload / or get files from the nat with 50MB/S then it drops really hard. And streaming is painfull. Please help
