ReadyNAS share consumed space always 0

[defcon84]

I'm not seeing the space consumed by share or total space consumed by snapshots.

I used to be able to see it, but than i disabled and re-enabled 'Quota'.

Anyway to get it back?

[Marty_M · Accepted solution]

Hello defcon84,

 
There is a possible problem with the OS of the NAS which an OS re-install or reflashing the firmware may address but the process will require a downtime on the NAS. It would need to scheduled downtime of the NAS . Also to be on the safe side I would recommend to have a backup of the contents of the NAS especially files that is used in production. 
 
Regards,
Marty_M 
NETGEAR Community Team

[StephenB]

you should see it if quotas are enabled via the volume settings.

[defcon84]

It should be, but it doesn't.

[StephenB]

Maybe try a reboot with quota enabled?

[defcon84]

Did not help 😞

[Marty_M]

Hello defcon84,

 
Have you tried using different browser and computer in accessing the Admin page? You may also want to reflash or upgrade the firmware of the NAS.
 
Regards,
Marty_M 
NETGEAR Community Team

[defcon84]

Same issue on different browser.

Flashing and/or upgrading firmware is not possible at the moment. It's a production server.

And it wordt before I disabled and re-enabled 'Quota' on the volume. 

[StephenB]

What firmware are you running?

[defcon84]

i'm already on the latest firmware: 6.7.5

[Marty_M · Accepted solution]

Hello defcon84,

 
There is a possible problem with the OS of the NAS which an OS re-install or reflashing the firmware may address but the process will require a downtime on the NAS. It would need to scheduled downtime of the NAS . Also to be on the safe side I would recommend to have a backup of the contents of the NAS especially files that is used in production. 
 
Regards,
Marty_M 
NETGEAR Community Team

[defcon84]

I'm marking this as answer, but i'm unable to test it. 🙂

Thanks for your help.