ReadyNas 104 stuck booting

[pappylapoo]

Hi All,

My readynas 104 is stuck booting at about 60% "Systemd-Update-U" on the LCD display.

I have tried the following:

1. OS-Reinstall

2. Factory Reset

3. USB recovery

4. Changed disks

All with the same result. I can login via telnet in "Tech Support Mode", and was wandering is there is a command that I can force a factory reset. It almost feels its not completely resetting.

I was running 6.9.2 and have updated via USB recovery to 6.9.3, and that didnt help either.

I can see the device in Raidar when is started booting saying "system is starting" but then disapears when it gets further into the boot process.

Thankyou in advanced.

[mdgm-ntgr · Accepted solution]

This should be fixed now (Successfully completed USB Boot Recovery should have also been able to resolve this).

Also the system time of your system had been set back to 1925 for some reason. That should be fixed as well.

[mdgm-ntgr]

Sounds like you could have had a partially completed update, perhaps with a different firmware loaded onto the disks than the firmware used by the early boot process and the kernel.

[mdgm-ntgr · Accepted solution]

This should be fixed now (Successfully completed USB Boot Recovery should have also been able to resolve this).

Also the system time of your system had been set back to 1925 for some reason. That should be fixed as well.