- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
ReadyOS 6 Issue with Large Volumes (missing space)
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
This is a follow on from - https://community.netgear.com/t5/Using-your-ReadyNAS/Adding-a-4th-10TB-drive-to-a-XRAID-array-on-Pro...
I've placed the 4x10TB and 2x6TB drives in the 516 and factory reset.
It is only showing a 27TB volume.
Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md127 : active raid5 sda3[0] sdf3[5] sde3[4] sdd3[3] sdc3[2] sdb3[1] 29278364160 blocks super 1.2 level 5, 64k chunk, algorithm 2 [6/6] [UUUUUU] [>....................] resync = 1.5% (92339416/5855672832) finish=482.5min speed=199047K/sec md1 : active raid6 sdf2[5] sde2[4] sdd2[3] sdc2[2] sdb2[1] sda2[0] 2094848 blocks super 1.2 level 6, 64k chunk, algorithm 2 [6/6] [UUUUUU] md0 : active raid1 sdf1[5] sde1[4] sdd1[3] sdc1[2] sdb1[1] sda1[0] 4190208 blocks super 1.2 [6/6] [UUUUUU] unused devices: <none> /dev/md/0: Version : 1.2 Creation Time : Sat Aug 18 20:44:59 2018 Raid Level : raid1 Array Size : 4190208 (4.00 GiB 4.29 GB) Used Dev Size : 4190208 (4.00 GiB 4.29 GB) Raid Devices : 6 Total Devices : 6 Persistence : Superblock is persistent Update Time : Sat Aug 18 20:52:20 2018 State : clean Active Devices : 6 Working Devices : 6 Failed Devices : 0 Spare Devices : 0 Name : 0ed5d010:0 (local to host 0ed5d010) UUID : 6f9e2c56:3498cd6e:706c27f3:97c019e0 Events : 19 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 8 49 3 active sync /dev/sdd1 4 8 65 4 active sync /dev/sde1 5 8 81 5 active sync /dev/sdf1 /dev/md/1: Version : 1.2 Creation Time : Sat Aug 18 20:44:59 2018 Raid Level : raid6 Array Size : 2094848 (2045.75 MiB 2145.12 MB) Used Dev Size : 523712 (511.44 MiB 536.28 MB) Raid Devices : 6 Total Devices : 6 Persistence : Superblock is persistent Update Time : Sat Aug 18 20:45:18 2018 State : active Active Devices : 6 Working Devices : 6 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K Name : 0ed5d010:1 (local to host 0ed5d010) UUID : 5a9e34db:a32bc6cd:f723f220:62cfff8d Events : 18 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 2 8 34 2 active sync /dev/sdc2 3 8 50 3 active sync /dev/sdd2 4 8 66 4 active sync /dev/sde2 5 8 82 5 active sync /dev/sdf2 /dev/md/data-0: Version : 1.2 Creation Time : Sat Aug 18 20:45:16 2018 Raid Level : raid5 Array Size : 29278364160 (27922.02 GiB 29981.04 GB) Used Dev Size : 5855672832 (5584.40 GiB 5996.21 GB) Raid Devices : 6 Total Devices : 6 Persistence : Superblock is persistent Update Time : Sat Aug 18 20:50:21 2018 State : active, resyncing Active Devices : 6 Working Devices : 6 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K Resync Status : 1% complete Name : 0ed5d010:data-0 (local to host 0ed5d010) UUID : 86bd18e6:9f28a484:85e22e96:9b3d249e Events : 6 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 2 8 35 2 active sync /dev/sdc3 3 8 51 3 active sync /dev/sdd3 4 8 67 4 active sync /dev/sde3 5 8 83 5 active sync /dev/sdf3
It doesn't seem to have created the second array across the 4 10TB drives.
I thought the whole point of XRAID was it was supposed to pick this up automatically.
Will it find it on a reboot?? should I factory reset again?? do it manually??
Thanks
Andy
Solved! Go to Solution.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@powellandy1 wrote:
Correct. I've only just reset.
I've rebooted it it and nothing changed (although I accept it might not as it's in the middle of a rebuild).
Just leave it until the resync completes. It won't start on the second RAID group until it's done with the first one.
All Replies
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ReadyOS 6 Issue with Large Volumes (missing space)
It looks to me like the resync isn't finished - is that correct?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ReadyOS 6 Issue with Large Volumes (missing space)
Correct. I've only just reset.
I've rebooted it it and nothing changed (although I accept it might not as it's in the middle of a rebuild).
I checked with the XRAID calculator and it should be 38TB.
I'm just mindful of the issue I had with the Pro6 when the 4th drive didn't expand properly and mdgm kindly did it manually but it lost XRAID and therefore the ability to seamlessly expand in the future... I was hoping a factory reset would have found all 38TB initially.
I've used mdadm -G before to expand a volume but in this case there isn't a md126 to expand.... and I would have thought there should be...
Thanks
Andy
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@powellandy1 wrote:
Correct. I've only just reset.
I've rebooted it it and nothing changed (although I accept it might not as it's in the middle of a rebuild).
Just leave it until the resync completes. It won't start on the second RAID group until it's done with the first one.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ReadyOS 6 Issue with Large Volumes (missing space)
My bad... I was expecting it to allocate both at once. Thank you.
Kind regards,
Andy
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ReadyOS 6 Issue with Large Volumes (missing space)
All sorted. 38TB as expected.
Thanks
Andy