× NETGEAR will be terminating ReadyCLOUD service by July 1st, 2023. For more details click here.
Orbi WiFi 7 RBE973
Reply

ReadyTIER

jpass022
Luminary

ReadyTIER

I want to set up the ReadyTIER feature, but I have read 2 different requirements in 2 different manuals:

 

https://www.downloads.netgear.com/files/GDC/READYNAS-100/ReadyNAS_FlexRAID_Optimization_Guide.pdf

This manual states (p10) - The number of SSDs for the SSD tier should be equal to the number of drives in the RAID group.

 

http://www.downloads.netgear.com/files/GDC/READYNAS-100/READYNAS_OS_6_SM_EN.pdf

This manual states (p42) - You can use ReadyTIER to add SSD drives to an existing volume as a tier. ReadyNAS OS automatically

uses a tier for volume metadata. With some workloads, this can improve filesystem performance.
 
Depending on the RAID setting of the volume, a minimum number of disks are required to add a tier. Themetadata tier disks need not be the same size as the data disks. You can estimate the size needed by pointing tor the icon of the volume and checking the volume metadata allocation.
 
So is it one or the other or both? Is it the number of ssd drives matching the amount of drives in the volume or is it only total capacity of the ssd drives that matters?
Model: RR4312X| ReadyNAS 10GbE 12 Bays with up to 120TB total storage
Message 1 of 5
yxue
NETGEAR Expert

Re: ReadyTIER

This will need to be a configurable option, but the following will be the default configuration:(Please see the attachment).

Message 2 of 5
jpass022
Luminary

Re: ReadyTIER

yxue,

 

Is this unreleased information? Both manuals said that striped volumes couldn't use ReadyTier? Such as RAID50 and RAID60...

Which brings up another question. Is it still required to use Flex-RAID mode to use ReadyTier?

 

https://www.downloads.netgear.com/files/GDC/READYNAS-100/ReadyNAS_FlexRAID_Optimization_Guide.pdf

(p10)

 

Requirements for ReadyTier:

1. The ReadyNAS is running 6.9.0 and above.

2. The ReadyNAS must be in Flex-RAID mode and not X-RAID.

3. If there is more than one RAID group in the volume, then the volume must be a concatenated volume.

(You cannot add a tier to a striped volume)

4. The number of SSDs for the SSD tier should be equal to the number of drives in the RAID group.

Message 3 of 5
yxue
NETGEAR Expert

Re: ReadyTIER

Yes, it is required to use Flex-RAID mode to use ReadyTier
Message 4 of 5
mdgm-ntgr
NETGEAR Employee Retired

Re: ReadyTIER


@jpass022 wrote:

Both manuals said that striped volumes couldn't use ReadyTier? Such as RAID50 and RAID60...

 


The GUI won't let you add a tier if the RAID level is incompatible with ReadyTier.

Message 5 of 5
Top Contributors
Discussion stats
  • 4 replies
  • 2247 views
  • 1 kudo
  • 3 in conversation
Announcements