Discussion stats
  • 1 reply
  • 2767 views
  • 0 kudos
  • 2 in conversation
Announcements

Top Contributors
Reply
Highlighted
Aspirant

SNMP ReadyNAS 2100 and 2120

Hi

 

I am trying to setup SNMP monitoring on a couple of our NAS boxes to our monitoring system (MaxFocus) but I am having a struggle getting this to work.

I have enabld SNMP on the NAS nox and specified the IP address of the machine I am trying communicate too.

 

When I run any checks on the NAS box I receive error stating No Such Object which is referring to the OID check, below are a few examples of the OID I am running:

 

Volume 1 - free space -  1.3.6.1.4.1.4526.18.7.1.6

Volume 1 - Status - 1.3.6.1.4.1.4526.18.7.1.4

Disk1 State - 1.3.6.1.4.1.4526.18.3.1.4

 

volume1-disksapce.JPG

 

These are predefined on MaxFocus under Netgear ready nas, however after speaking to support they have advised these codes could be wrong as manufactures changes these.

 

i have looked online and i can't find any different codes to run.  

 

Any help would be appreciated.

 

Thanks

Message 1 of 2
Highlighted
NETGEAR Expert

Re: SNMP ReadyNAS 2100 and 2120

SNMP MIBs for the ReadyNAS OS 6 devices (such as your 2120) can be found at the "Download MIB" link under the SNMP service settings:

http://kb.netgear.com/app/answers/detail/a_id/23107

 

SNMP MIBs for RAIDiator devices (such as your 2100) can be found at:

http://www.readynas.com/download/SNMP/READYNAS-MIB.txt

 

These should get you the correct OID paths.

Message 2 of 2