- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
Dear Forum Members
It's been a good while since I have been on this forum, about March 2023, and as you can imagine I have run into some technical problems that I cannot work out for myself and would be grateful for any help or advice that maybe passed my way.
But first, my equipment:
4 x ReadyNAS Duo v2 running firmware 5.3.13 (including 1 failing RNDuo v2)
1 x ReadyNAS RN102 running firmware 6.10.10
1 x ReadyNAS RN104 running firmware 6.10.10
1 x PC running Windows 11 Pro
Problem 1) I believe that ever since my Win11 O/S was upgraded, with a minor patch or fix, I have been unable to access my RNDuo v2's dashboard/admin screens.
Back in March 2023, I could access my RNDuo v2's admin screens by installing the Apache2_2.2.34-arm-0.0.1.bin utility on all my V2's. However lately, I have totally lost this “admin access” facility, despite trying all of my five browsers, i.e. Firefox, Opera, Chrome, Edge and AVG.
I can still access the admin screens of my RN102 and RN104 without any problems, apart from the initial warning screens.
So I was wondering, is there a windows app/utility or setting that will allow me to regain access to my V2's admin screens.
Problem 2) One of my RNDuo v2's has a partial failure, I think the internal network card is having problems because no other device on my network can communicate with this device anymore, even though it can still be seen by but not accessed by RAIDar v6.0.
I was wondering which one the following two solutions would stand the most chance of success:
a) Connect an external HD to the front USB2.0 socket and backup all my data to the ex HD, with the hope that I can stream that data to one of my other RN devices.
b) Try to buy another RNDuoV2.0 (which are now extremely rare) and put the two WD Red Plus HDs, currently in the failing V2, in the new V2.
Nevertheless, I am willing to try any other solution that forum members can think of, rather than use my own cumbersome ideas.
Problem 3) Which is not really a problem but a search for some extra knowledge, I have just installed two 4TB WD Red Plus HDs in my RN104, both disks are now formatted and running as Raid 1.
What will happen if and when I add two more (unformatted/unused) WD Reds to my RN104?
Eagerly awaiting replies
UK Bob
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
@ukbobboy01 wrote:
Problem 1) Back in March 2023, I could access my RNDuo v2's admin screens by installing the Apache2_2.2.34-arm-0.0.1.bin utility on all my V2's. However lately, I have totally lost this “admin access” facility, despite trying all of my five browsers, i.e. Firefox, Opera, Chrome, Edge and AVG.
What error are you getting when you try to access the web ui?
Have you tried disabling antivirus (and any internet security software) running on the PC?
@ukbobboy01 wrote:
Problem 2) One of my RNDuo v2's has a partial failure, I think the internal network card is having problems because no other device on my network can communicate with this device anymore, even though it can still be seen by but not accessed by RAIDar v6.0.
Is the IP address of this NAS in the range of your LAN subnet?
@ukbobboy01 wrote:
Problem 3) Which is not really a problem but a search for some extra knowledge, I have just installed two 4TB WD Red Plus HDs in my RN104, both disks are now formatted and running as Raid 1.
What will happen if and when I add two more (unformatted/unused) WD Reds to my RN104?
If you are using XRAID:
- If you add two 4 TB drives, then the volume would be converted to RAID-5 and expand from 4 TB (~3.64 TiB) to 12 TB (~10.91 TiB). Note you could just add one 4 TB drive and expand to 8 TB (~7.27 TiB).
- If you add two larger disks (of the same size), then the capacity rule is "sum the disks and subtract the largest" So if you added two 8 TB, the capacity would grow to 16 TB. In this scenario, you would need to add two larger drives in order for the NAS to use all the space on the disks.
- If you add smaller disks, the NAS will ignore them.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
Hi StephenB
Guess what, I was half way through writing my answers to your queries yesterday when my Internet connection went down. Luckily, I found the problem, the main internal telephone cable failed, and so I replaced it with a new one.
Now on with my reply.
Thanks for your reply, I will try to answer your questions as best I can:
You asked, in reply to my Problem 1)
What error are you getting when you try to access the web ui?
There are no errors, as such, just all my browsers are timing out.
Have you tried disabling antivirus (and any internet security software) running on the PC?
No, I've not disabled my Internet Security Software because I've not needed to before but I will try it now that you have suggested it. However, my RN102 and RN104 can still be accessed as before, i.e. no change.
You also asked, in reply to my Problem 2)
Is the IP address of this NAS in the range of your LAN subnet?
Yes it is, nothing has changed on my network, my IP and subnet addresses are still the same.
As for my RN104, thanks for that info as I was not 100% sure, although I suspected it, that the disk space would grow if I added an additional 2 x 4TB (or bigger) HDs.
Going back to the RNDuoV2.0 that partially failed, RAIDar (v.6) reports that this device is healthy, although the Admin, Browse and Locate buttons, when pressed, cannot find this device. I now believe that I did not vet this device properly before buying it from Ebay. I guess that since I've had many successful purchases I became too blasé, let my guard down and ended up purchasing a dud.
Anyway, I've purchased an external HD, a 4TB passport from WD, and plan to see if I can backup my data from that faulty RNDuoV2.0, using the front USB socket and backup button, in order to get my info back.
BTW, just found out that FW6.10.10, on my RN102 & 104, has locked certain features in place, i.e. I cannot upgrade plex, either automatically or manually, I'm stuck at version 1.11.3.4803. Nor can I downgrade the FW back to 6.10.9. where the updating facilities still existed.
Maybe I've got this wrong but until I can get my RN102 & RN104 working properly, i.e. do what I need them to do, I'm somewhat stuck.
My ReadyNAS adventures continue.
Cheers in advance
UK Bob
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
@ukbobboy01 wrote:
BTW, just found out that FW6.10.10, on my RN102 & 104, has locked certain features in place, i.e. I cannot upgrade plex, either automatically or manually, I'm stuck at version 1.11.3.4803. Nor can I downgrade the FW back to 6.10.9. where the updating facilities still existed.
You should be able to downgrade to 6.10.9. What error are you getting when you try?
Note there is a workaround for plex. You can upload and install the deb file as if it were a firmware update.
That said, you should also apply the modifications in post 37 here:
This will need to be re-applied after every firmware update and likely after every OS reinstall. This mod isn't needed immediately, but if a plex update requires a new linux library, it will without this.
@ukbobboy01 wrote:
What error are you getting when you try to access the web ui?
There are no errors, as such, just all my browsers are timing out.
Can you ping the NAS IP address?
Have you tried https://nas-ip-address/admin (using the real IP address)? Or just used RAIDar?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
Hi StephenB
I am having difficulty trying to understand your reply, no doubt this is my fault due to my advancing age (near 70).
Anyway, I'd like to try something else, i.e. install Plex 1.41x on my RN102, running FW 6.10.10, from scratch. You see, I've deleted Plex 1.11 from my device because it was causing problems without any obvious way of applying a solution, so I switched off Plex and deleted it.
However, I do not see anyway of installing Plex 1.41x manually on my RN102, whereas I could quite easily click a virtual button on my RNDuoV2.0, search my PC's HD and install or upgrade my Plex app from there. But there seem to be no such facility on the RN102 or RN104, what am I missing?
Here is the Apps section of my Admin page, as you can see there is nothing there that indicates a facility to either manually install or update an application.
Also, the Upload and Available Apps buttons both give me the following error.
So you see I am stuck, I cannot see any facility where I can do anything to affect a pre-installed application or install a new one.
You mentioned , in your previous post, the following:
Note there is a workaround for plex. You can upload and install the deb file as if it were a firmware update.
However, I cannot see where this can be done.
Can you please "Jack and Jill" me through this process, i.e. explain it in a way my poor nearly 70 year old brain can understand.
Thanks in advance
UK Bob
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
You can do it from here:
Just ignore the fact that it really isn't a firmware update.
This is also where you can downgrade back to 6.10.9. Just get it from here
and extract the firmware binary from the zip file.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
@ukbobboy01 wrote:
Problem 2) One of my RNDuo v2's has a partial failure, I think the internal network card is having problems because no other device on my network can communicate with this device anymore, even though it can still be seen by but not accessed by RAIDar v6.0.
I was wondering which one the following two solutions would stand the most chance of success:
a) Connect an external HD to the front USB2.0 socket and backup all my data to the ex HD, with the hope that I can stream that data to one of my other RN devices.
b) Try to buy another RNDuoV2.0 (which are now extremely rare) and put the two WD Red Plus HDs, currently in the failing V2, in the new V2.
Here is my advise on this one: With the units off, switch the drives from this DuoV2 into another that works. If the problem goes away, then it is the hardware that's the issue. If it doesn't, then it's something in the OS.
If the problem is cleared up, use the opportunity to back up the contents to an external drive. Then consider your options. Buying a used DuoV2 is somewhat risky, as they are quite old. You also need to carefully look at anything listed as a "Duo V2", as most are really V1's. Buying another brand of NAS as a replacement, perhaps large enough to replace several of your NAS, is likely going to be a better path.
When you make the backup, consider using NTFS as the drive format, then you don't need to connect it to another NAS to restore the data, you can do so from a PC if you want to.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
Hi StephenB
Thank you for that solution, I would never have guest that the Install Firmware button also doubled as an Application Update button as well.
You know, this sort of dual usage facility is not intuitive, obvious or has any clues that would lead a person to believe that such a dual facility function exist. For example, why would a function dedicated to updating/maintaining the NAS's operating system also install and update a software application made by a different company, i.e. Plex.
I just don't understand it, anyway, once again thanks for this solution because I would not have worked it out for myself, it doesn't seem logical.
Until next time (my new problem)
UK Bob
PS. Something strange is happening with the Plex installations on my RN102 and RN104, the individual installations can see each others databases, i.e. the RN102 can see and display the plex database on the RN104 and vice versa.
PPS. Once again, something my poor old brain can't understand.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
Hi Sandshark
I like your suggestions, and you are quite right, the RNDuoV2's are quite old and it is very difficult, probably now impossible, to find one in good working condition. You see, I have been lucky in the past by buying 2 x RNDuoV2's, on separate occasions, that were bought but never used by their original owners, I'm guessing that these owners found the RNDuoV2's were too difficult to set up and use.
BTW, I also managed to buy a totally unused RN102, also an old device.
Anyway, as mentioned in a previous post in this thread, I became blasé when buying this last (which turns out to be faulty) RNDuoV2 from Ebay (UK), I ignored many red flags, such as the seller not showing this device in it's entirety.
However, as I said, I like your suggestion and I will try to buy and use another RNDuoV2.
Thanks
UK Bob
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
@ukbobboy01 wrote:
Thank you for that solution, I would never have guest that the Install Firmware button also doubled as an Application Update button as well.
You know, this sort of dual usage facility is not intuitive, obvious or has any clues that would lead a person to believe that such a dual facility function exist.
I'm sure Netgear didn't intend it to work this way, so this is kind of a hack. Another user here discovered it, and posted it here.
@ukbobboy01 wrote:
PS. Something strange is happening with the Plex installations on my RN102 and RN104, the individual installations can see each others databases, i.e. the RN102 can see and display the plex database on the RN104 and vice versa.
Are you accessing both using the same Plex account? If they are, then the plex web app will show both. But the two servers are actually separate - the web app is just showing both.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
@Sandshark wrote:
@ukbobboy01 wrote:Problem 2) One of my RNDuo v2's has a partial failure, I think the internal network card is having problems because no other device on my network can communicate with this device anymore, even though it can still be seen by but not accessed by RAIDar v6.0.
Here is my advise on this one: With the units off, switch the drives from this DuoV2 into another that works. If the problem goes away, then it is the hardware that's the issue. If it doesn't, then it's something in the OS.
That is a good test. Make sure the units are off when you swap the disks. If you haven't done this already, I suggest labeling them with the NAS and slot number as you remove them. That will eliminate any chance of losing track of what does where.
My guess is that will it will be the OS.
How long has the v2 had this problem? Also, what errors are you seeing when you try to connect?
@ukbobboy01 wrote:a) Connect an external HD to the front USB2.0 socket and backup all my data to the ex HD, with the hope that I can stream that data to one of my other RN devices.
b) Try to buy another RNDuoV2.0 (which are now extremely rare) and put the two WD Red Plus HDs, currently in the failing V2, in the new V2.
FWIW, neither of these are guaranteed to work. Hopefully we can figure out what's wrong, and find a good fix.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
Hi Forum Members StephenB & Sandshark
1) StephenB
Once I installed Plex 1.41, thanks to your solution, both my RN102 and RN104 started to behave as expected, apart from one small issue on the RN104, I can now add to my plex databases without problems.
2) Sandshark
As per your suggestion, I plan to look for another RNDuoV2.0, hopefully one that is either unused or lightly used. You see, I've found that although the RNDuoV2.0 is a very good product a lot of NAS users found it difficult to get to grips with and so put them away in cupboards and forgot about them. It is one of these forgotten RNDuoV2.0's that I am hoping to purchase.
I'll let you know how I get on.
UK Bob
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
Hi StephenB
Back in September, I wrote:
Problem 1 Back in March 2023, I could access my RNDuo v2's admin screens by installing the Apache2_2.2.34-arm-0.0.1.bin utility on all my V2's. However lately, I have totally lost this “admin access” facility, despite trying all of my five browsers, i.e. Firefox, Opera, Chrome, Edge and AVG.
You replied: Have you tried disabling antivirus running on the PC?
Your solution works, I managed to temporarily switch off my AVG Internet Security application and I found, to my amazement, that I could now re-access my RNDuoV2.0's dashboards again.
Cheers StephenB
UK Bob