Uncontrolled power-ups with RN Pro after Raidar Upg.

[jewelryab]

Now with the current firmware after a few minutes of shutting down, it turns itself back on. The WOL is not enabled.

[tark]

support is their any update on this issue ?

[tark]

bump

[Jedi_Knight]

Please contact support and open the case if you are having issue with current 4.2.17 release.

[Jedi_Knight]

Tark,

We will get this fix in next release. Thanks.

[BotanyBay]

I just received an RMA unit for a different problem and the new unit has this issue. it always boots when power is first applied and if i turn it off with two presses of the blue button it comes back up in about 4 minutes.

I put in a single spare disk - updated the firmware to 4.2.17 which is what i was using before - powered down - installed 6 disks and it came right up. however unit will not stay powered off more than 5 min before reboot.

this is second rma
- original unit stuck not finding disks and saying readynas
- first rma temp 2 sensor went to 190F during weekly parity scrub of raid but normal otherwise probable thermal grease issue
- second rma arrived with 4.2.12 firmware (if memory serves) so flashed to 4.2.17 with spare disk but will not stay powered off

any suggestions? this is a pro business edition.

[BotanyBay]

Ended up with a new unit, everything is working well at this point! Thanks for the support!!!