This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
The WD80EFAX are NAS purposed drives and are new so getting it listed to the Hard disk HCL might take longer. However, this should still be good for use with your RN316.
The possible issue might be with the mounting holes of the WD80EFAX which has the middle hole wherein the tool less bracket of the drive tray does not have. You will have to remove the rear pin or mount the disk using the bottom screws.
You can check this thread regarding the mounting. This is only needed if the WD80EFAX has the same mounts as with the disk mentioned.
The WD80EFAX are NAS purposed drives and are new so getting it listed to the Hard disk HCL might take longer. However, this should still be good for use with your RN316.
The possible issue might be with the mounting holes of the WD80EFAX which has the middle hole wherein the tool less bracket of the drive tray does not have. You will have to remove the rear pin or mount the disk using the bottom screws.
You can check this thread regarding the mounting. This is only needed if the WD80EFAX has the same mounts as with the disk mentioned.
I, extremely unfortunately, had TWO DOA WD80EFAX drives! Yes two! Hence my questions to the forum about these drives and their compatibility with the RN316.
Now that both have been swapped with working drives, I’ll be replacing drives one-by-one in the RN316 and watching the progress!
