× NETGEAR will be terminating ReadyCLOUD service by July 1st, 2023. For more details click here.
Orbi WiFi 7 RBE973
Reply

Re: can't boot after battery removing

grish4
Aspirant

can't boot after battery removing

after changing a weak battery (2,6v) the boot is stuck at 0%. Invisible at raidar, responding to ping

 

I will tempt an alternativ boot using the reset button.

Can I pull off all the disk and repair the 6.6 firmware with a special boot ?and  after that just reinstall the disk ?

Do I need to put an empty disk in ?

a USB key ?

 

I have a copy of alll tha is on the disk, but I prefer not reorganize 6 TB of data and learn how to get out from a such situation.

 

thank's

 

Model: ReadyNASRNDP6310|ReadyNAS Pro 6
Message 1 of 9

Accepted Solutions
mdgm-ntgr
NETGEAR Employee Retired

Re: can't boot after battery removing

No, you don't need to open anything on your firewall.

Your 4GB root volume was filled up with a large MySQL database. I moved that to the data volume and created a symlink.

View solution in original post

Message 8 of 9

All Replies
mdgm-ntgr
NETGEAR Employee Retired

Re: can't boot after battery removing

USB Boot Recovery only helps if the problem is on the internal flash. That sounds unlikely with these symptoms.

 

Have you been getting any SMART errors recently?

Message 2 of 9
grish4
Aspirant

Re: can't boot after battery removing

it's a second hand NAS for me, so I don't know everything. I have replace two disc with smart errors and ata errors, and have no smart alert any more. This morning it was stuck at 99% but reacheable with raidar, and all shared folder seen from my mac. raidar sait in orange "the admin page service is no on" or something like tha and it was not possible to load the admin.

 

 

So what the receipe ? <fairy tales mod on>

 

  1. pull out all the disk,
  2. boot on an USB disk (I supposed the battery remove touch the firmware but as you say it'd perhaps the wrong path)
  3. re-instal the 6.6 
  4. put the disk back in

I don't know anything on the point 2, and forget the half of the 3 Cat Very Happy

 

 

 

Message 3 of 9
mdgm-ntgr
NETGEAR Employee Retired

Re: can't boot after battery removing

USB Boot Recovery is not some "magic" fix for any problem. I wouldn't try it at this point as if anything it's only likely to create more problems.

 

Are you seeing "Management Service is Offline" in RAIDar?

Message 4 of 9
grish4
Aspirant

Re: can't boot after battery removing

Yes that was the message.

 

I tried 2 reboot.  

I got a proc-sys-fs-binfmt_misc... after the first reboot.

stuck at 0% after  fsck included this morning after six hours at 0%

 

I will begin by a boot with a push on the reset button, wich mod choose ?

 

OS reinstall ?

do  Ineed to pull the disc out ?

will it put 6.6 back ?

thanks for your help

Message 5 of 9
mdgm-ntgr
NETGEAR Employee Retired

Re: can't boot after battery removing

I've sent you a PM.

Message 6 of 9
grish4
Aspirant

Re: can't boot after battery removing

OK I have follow the steps and even put a pic of the raidar window.:-) 

Do I need to open something on my firewall ?

 

What the meanig of the count down on my private messages ? time before reboot  I guess ? impressive !

Message 7 of 9
mdgm-ntgr
NETGEAR Employee Retired

Re: can't boot after battery removing

No, you don't need to open anything on your firewall.

Your 4GB root volume was filled up with a large MySQL database. I moved that to the data volume and created a symlink.

Message 8 of 9
grish4
Aspirant

Re: can't boot after battery removing

Whaou ! what model technical service do you have !

I won't try again to instal third part .deb app. (think it come's from there, I got to analyse more). it's working ! 🙂

thnak's again.

Message 9 of 9
Top Contributors
Discussion stats
  • 8 replies
  • 2147 views
  • 0 kudos
  • 2 in conversation
Announcements