Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: Cannot create working volume on Ultra 2+
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2011-08-25
08:49 PM
2011-08-25
08:49 PM
Cannot create working volume on Ultra 2+
Have an ultra 2+ RAIDiator 4.2.17, worked fine with 2 3TB Hitachi HDS723030ALA640 for a couple months.
Started acting flaky.
Would glitch during DLNA streaming.
Backups wouldn't complete.
File scan errors.
SABNZB+ would crash.
Started RAID resyncs and would get stuck and not complete.
Tried a factory default with each drive separately.
Got stuck creating volumes, or RAIDar stopped responding.
Tried to test disks.
After 24hrs+ stuck.
Took disks out.
Performed full long disk scans with SeaTools.
Both passed.
No SMART errors.
Still can't finish a factory reset.
Bought a new 3TB Seagate ST33000651AS.
Still won't finish the factory reset.
Any ideas before I try to get an RMA? (I shall attempt support tomorrow)
It doesn't seem like its the disks at this point.
Started acting flaky.
Would glitch during DLNA streaming.
Backups wouldn't complete.
File scan errors.
SABNZB+ would crash.
Started RAID resyncs and would get stuck and not complete.
Tried a factory default with each drive separately.
Got stuck creating volumes, or RAIDar stopped responding.
Tried to test disks.
After 24hrs+ stuck.
Took disks out.
Performed full long disk scans with SeaTools.
Both passed.
No SMART errors.
Still can't finish a factory reset.
Bought a new 3TB Seagate ST33000651AS.
Still won't finish the factory reset.
Any ideas before I try to get an RMA? (I shall attempt support tomorrow)
It doesn't seem like its the disks at this point.
Message 1 of 2
Labels:
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2011-08-25
09:59 PM
2011-08-25
09:59 PM
Re: Cannot create working volume on Ultra 2+
Try running the memory test using the boot menu (http://www.readynas.com/kb/faq/boot/how_do_i_use_the_boot_menu) for at least a few passes.
I would suggest you contact tech support for assistance.
I would suggest you contact tech support for assistance.
Message 2 of 2