NTP settings not persistent

[EKroboter]

Still no resolution to this issue. 

[FramerV]

Hi EKroboter,

Might be best if you can send your logs for further checking.

How do I add my ReadyNAS OS 6 storage system to my ReadyCLOUD Account?

Regards,

[EKroboter]

Logs sent.

[FramerV]

Hi EKroboter,

Thanks. Let me inquire about your case.

Regards,

[Skywalker]

@EKroboter, it looks like the last NTP interaction was too long ago, and is no longer in your logs.  Can you do a fresh reboot, then try enabling NTP again from the GUI, and send in your logs immediately after that?  Alternatively, you can just enable Secure Diagnostic Mode, and PM me the 5-digit code so we can investigate directly.

[EKroboter]

I'll try to reboot tonight after the backup jobs run, enable NTP and download the logs.  Thanks for your help.

[Skywalker]

Great, now can you do one more reboot, then wait 20 minutes and send in one last set of logs?

There are definitely some issues with NTP and clock settings in general in 6.6.x.  It should all be fixed in 6.7.0, which is currently available as a public beta.  However, even on 6.6.x, it should all work normally after a reboot once you have it configured.

[EKroboter]

Oh, I'll try again tonight. Can't right now since we have three servers using iSCSI targets and all are being used. Were you able to see anything wrong in the logs I sent?

[Skywalker]

Based on the logs you sent, the system appears to be configured properly, but in a state where periodic NTP updates won't kick in until after a reboot (or a restart of the connman service).

[EKroboter]

Hmm, I see. I´ll try to do multiple reboots whenever I get a chance. Hopefully this will be fiex in the next update.

[Skywalker · Accepted solution]

Yes, it should all be fixed in 6.7.0, which is currently available as a public beta.

[EKroboter]

Yes! 6.7.1 fixed it for me, and still works after 6.7.4. Rebooted a couple of times and the NTP settings are saved.

Thank you.