- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: 2 routers on different networks setup
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
MK63 — Nighthawk Mesh WiFi 6 System
I have a complicated setup question for the Nighthawk Mesh MK63. I want to set up the Mesh in the following way.
IP addresses for example: 76.76.76.76 10.10.1.1
Arris Cable modem ->->-> Mesh router Wan port ->->-> Mesh router Lan port ->->-> GS308 unmanaged switch ->->
10.10.1.2 10.10.1.3
-> GS605 unmanaged switch ->->-> Mesh satellite Lan port - - - Mesh satellite WiFi
IP addresses for example: 10.10.1.4 10.10.2.1
GS308 unmanaged switch ->->-> Airport extreme 1 Wan port Airport extreme 1 Lan port ->->
10.10.2.2
-> Airport extreme 2 Wan port - - - Airport express 1 and 2 WiFi
The Airport extreme setup is what I currently have except instead of coming from the GS308 unmanaged switch it
comes directly from the Arris Cable modem. I have all of my home control/Alexa, security, video, music, game
consoles and computers on the same network currently. I also have a guest network setup. I am trying to separate
some of the computers from everything else for work security reasons.
Solved! Go to Solution.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'll answer my own question. After some trial and error I found it is not possible because the AirPort Extreme is not configurable enough. When you connect to the extreme it will only work in bridge mode. To get around this I connected a dynex 401 router to the Netgear lan port and setup the second network. Then put the 2 extremes in bridge mode and created the separate wireless network and guest network.
All Replies
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'll answer my own question. After some trial and error I found it is not possible because the AirPort Extreme is not configurable enough. When you connect to the extreme it will only work in bridge mode. To get around this I connected a dynex 401 router to the Netgear lan port and setup the second network. Then put the 2 extremes in bridge mode and created the separate wireless network and guest network.
• Introducing NETGEAR WiFi 7 Orbi 770 Series and Nighthawk RS300
• What is the difference between WiFi 6 and WiFi 7?
• Yes! WiFi 7 is backwards compatible with other Wifi devices? Learn more