× NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
× Introducing the new Orbi 770 Series Mesh System. To learn more click here.
Orbi WiFi 7 RBE973
Reply

After power outage Nighthawk X6s EX800 not work and all 8 lights are blinking

Sammy28
Initiate

After power outage Nighthawk X6s EX800 not work and all 8 lights are blinking

Hi,

Had a power outage and now Ac3000 extender not working.  I just get all 8 lights blinking simultaneously.  Any ideas?

Thanks

Model: EX8000|AC3000 Nighthawk X6S Tri Band WiFi Mesh Extender
Message 1 of 4
plemans
Guru

Re: After power outage Nighthawk X6s EX800 not work and all 8 lights are blinking

Start with a factory reset. 

Push and hold reset while powered on for 7-15 seconds. (sometimes up to 30)

If that doesn't work, the firmware might be corrupt. 

You can try recoving it with tftp or nmrpflash.
are you on windows? if so, follow this guide
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
just make sure you enable tftp
https://www.thewindowsclub.com/enable-tftp-windows-10

and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done.
https://www.youtube.com/watch?v=R9DLrLQrpaw

and if that doesn't work, you can try using nmrpflash
https://github.com/jclehner/nmrpflash

Message 2 of 4
Sammy28
Initiate

Re: After power outage Nighthawk X6s EX800 not work and all 8 lights are blinking

I'll give it a try.  Many thanks!!!!

Message 3 of 4
plemans
Guru

Re: After power outage Nighthawk X6s EX800 not work and all 8 lights are blinking

Good luck!

If you do try tftp/nmrpflash, its sensitive to timings and can sometimes take a few tries. 

Message 4 of 4
Top Contributors
Discussion stats
  • 3 replies
  • 849 views
  • 1 kudo
  • 2 in conversation
Announcements

Orbi 770 Series