× Introducing the Orbi 970 Series Mesh System with WiFi 7 technology. For more information visit the NETGEAR Press Room.
Orbi WiFi 7 RBE973
Reply

Re: EAX80 - 5ghz weak signal when using 5ghz 160HT mode on RAX120 router

jvogal70
Aspirant

EAX80 - 5ghz weak signal when using 5ghz 160HT mode on RAX120 router

I have an RAX120 router and just received an EAX80 range extender. Upon setup I noticed that when I have AX Enabled w/2.4 & 5 ghz OFDMA enable + the 5ghz mode (up to 4803 Mpbs (11ax, HT160, 1024QAM)selected on the router,  My 5ghz signal on the range extender drops to 1 bar signal strength (red) with ~108Mbps, but still an availabe wireless mode of upto 4800Mpbs.  If i change the router 5ghz mode to (up to 4803Mpbs (11ax, HT80, 1024QAM) then the signal strenght returns to all bars (strong/green) with ~1441Mpbs, however the wireless modes drop to 2400mpbs.  This happens wherever I place the Range Extender.  I put it in the same room as the router ~2ft away and the same thing happens,  

 

Is there anything that can be done to resolve this issue. I bought the range extender for HT160 support, but it appears i am not getting what i payed for....

 

On a side note, if I disable AX it appears to work with HT160 (good signal, showing 4800 wireless mode, however, my wireless speeds drop to about ~30-50Mpbs from ~300-600Mpbs

 

1gb download(~945Mbps) / 45Mbps upload - comcast Internet using a CM1150V modem

 

Smart Connect and 1 WiFi name is also enabled

Message 1 of 7
jvogal70
Aspirant

Re: EAX80 - 5ghz weak signal when using 5ghz 160HT mode on RAX120 router

Now it is dropping WiFi signals all together and some devices are not even able to connect.  I am returning it and going back to using my EX8000 Range Extender.  This RE is a piece of garbage.

Message 2 of 7
david85297
Star

Re: EAX80 - 5ghz weak signal when using 5ghz 160HT mode on RAX120 router

I've had this issue since November 2019. They sent me a replacement back in November after spending an hour with support. Doesnt matter if its 2ft away, it will just drop connections. Getting a replacement will not fix the issue, it's a problem with all EAX80's.

I have an rax120 too, so it could be an issue when paired with the rax120. Little disappointed they havent had a firmware update to fix this issue that has been reported doe months.
Message 3 of 7
david85297
Star

Re: EAX80 - 5ghz weak signal when using 5ghz 160HT mode on RAX120 router

Does anyone know if Netgear plans on fixing this issue? I'm so confused on how their site is showing good reviews for this product when it clearly doens't work. I've gone through 2 of them, and have had the same issue.

Message 4 of 7
pdfr99
Aspirant

Re: EAX80 - 5ghz weak signal when using 5ghz 160HT mode on RAX120 router

I am having the same issue, but mine is connected to the RAX200 - This is just not a good extender if it is dropping connections all the time on the link between the two. 

 

I submitted a warranty claim to have mine replaced. 

Model: RAX200|Nighthawk Tri-band AX12 12-Stream Wi-Fi 6 Router
Message 5 of 7
WilzGear
Aspirant

Re: EAX80 - 5ghz weak signal when using 5ghz 160HT mode on RAX120 router

Equipment...

 

RAX120

EAX80 

Centurylink 1gb internet connection

Setup using a Windows 10 PC with Chrome broswer

Wifi Analyzer App from the Windows Store

...The Nighthawk app setup on my Samsung S5e tablet does not work correctly. I used the install assistant from the RAX80 through Chrome on a Windows PC.

‐--------

 

I confirm the same problem and flaw in the EAX80.  The EAX80 does not fully function at 160hz.

 

Setting the wifi mode to HT160 on the RAX120 yields only seconds of 4300mbps+ on the EAX80 then drops to 108mbps with a red router link lIght on the EAX80 extender.

The EAX80 does not fully function at 160hz

 

‐-------

The only working setup I found: 

 

Setting the RAX120 5ghz mode to HT80 will get the EAX80 5ghz connectiion to the RAX120 working at up to 2400mbps with sustained connections.

 

 

 

 

Model: RAX80|Nighthawk AX8 8-Stream WiFi Router
Message 6 of 7
dcinca
Apprentice

Re: EAX80 - 5ghz weak signal when using 5ghz 160HT mode on RAX120 router

If i turn on HT160 on Rax120, the speed test on my Eax80 is only like 30ish Mbps(500+ Mbps in HT80 mode).... Fix HT160 function please!!!!

Message 7 of 7
Top Contributors
Discussion stats
  • 6 replies
  • 1855 views
  • 0 kudos
  • 5 in conversation
Announcements

Orbi WiFi 7