Reply
Initial Contributor
Posts: 3
Registered: ‎2012-04-29

mbrn3000 loses settings

my mbrn3000 was working well one year, now he loosed his settings 2 times.
It works with the UMTS Modem MF 190 with Bob (Austria) very well. The loosing is very bad, because the router works fare away. The reset switch is bonded, therefore i am shure nobody has reseted it. After the loosing of the settings, the faktory setings are aktiv, after loading of the backup, it works well.
I use the last firmware 1.0.0.72

Any idea what i shall do, is the router defekt?


by a new one ?
Regular Contributor
Posts: 89,285
Registered: ‎2009-01-27

Re: mbrn3000 loses settings

make sure to use UPS backup with it.

any erratic power surge over period time will cause the router to go bad
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Initial Contributor
Posts: 3
Registered: ‎2012-04-29

Re: mbrn3000 loses settings

jmizoguchi wrote:
make sure to use UPS backup with it.

any erratic power surge over period time will cause the router to go bad


I think a little bit oversized UPS Backup? Not usual for such products.

I also use the MBR624GU without problems, but i need the trafic limitation
therefore i use the MBRN3000

Is it possible that the new firmware makes this problems?

has nobody this problem?
Highlighted
Regular Contributor
Posts: 89,285
Registered: ‎2009-01-27

Re: mbrn3000 loses settings

I think a little bit oversized UPS Backup? Not usual for such products.


???

small 350 APC UPS for 40 bucks will save you buck but that is your money so I wouldn't care for it for your investment Smiley Happy


I also use the MBR624GU without problems, but i need the trafic limitation
therefore i use the MBRN3000


you will not abel to limits the bandwidth anyway for single user or entire network

Is it possible that the new firmware makes this problems?


I doubt it but you can request to support at my.netgear.com

don't expect to see any changes in firmware by next week Smiley Happy
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Initial Contributor
Posts: 3
Registered: ‎2012-04-29

Re: mbrn3000 loses settings

thank you for your information.
I didn't know that so cheap UPS's exit, I will try it
Regular Contributor
Posts: 89,285
Registered: ‎2009-01-27

Re: mbrn3000 loses settings

You should able to find UPS from $40-59
Keep watching some ads..

Good luck
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Discussion Stats
  • 5 replies
  • 11722 views
  • 0 kudos
  • 2 in conversation
Top Contributors