Reply
Tutor
Posts: 1,845
Registered: ‎2010-12-22

WNDR3800 Firmware Update v1.0.0.44

WNDR3800 firmware v1.0.0.44 can be directly downloaded from here.

MD5: 4A791D61F837266A0E6F85D54C00A7E6
SHA-1: 19131906336DB9CF5167169B98EA946A668B3C83

Bug Fixes, New Features and Enhancements:
    to see all available WNDR3800 firmware.
_____
WNDR3700v1 (v1.0.7.98NA) - Router uptime (d:h:m:s): 1155:02:31:46 - How To Check and Change Your Router's Firmware: http://forum1.netgear.com/showthread.php?t=63234
Aspirant
Posts: 2
Registered: ‎2013-01-31

Re: WNDR3800 Firmware Update v1.0.0.44

Hi there, since I did this update, my wireless freezes. My devices can connect to the router but they don't receive any data. I have restarted the router to get it going again.

Can you please look into this.

Thanks
Aspirant
Posts: 2
Registered: ‎2013-01-31

Re: WNDR3800 Firmware Update v1.0.0.44

Since I installed this update, my wireless has stopped twice. My devices are connected to the router wifi but there no data exchange. I restarted the router to get it going.

Can you please check this? Thanks
Aspirant
Posts: 1
Registered: ‎2013-03-29

Re: WNDR3800 Firmware Update v1.0.0.44

After I installed this update, my wireless networks went down.

Is there any way to roll back this firmware update or at least to set the router to defaults?
Apprentice
Posts: 998
Registered: ‎2011-06-12

Re: WNDR3800 Firmware Update v1.0.0.44

Maxster wrote:
Is there any way to roll back this firmware update or at least to set the router to defaults?


Try downloading and installing v1.0.0.38 from the link below:

http://downloadcenter.netgear.com/en/product/WNDR3800
Aspirant
Posts: 1
Registered: ‎2013-03-30

Re: WNDR3800 Firmware Update v1.0.0.44

It seems that this version has fixed my other problems but it broke my DLNA + network drive capabilities eventhough the description says "Fixed the issue that router can't support 3TB USB disk well in DLNA function and ReadySHARE FTP protocol."

I have a Seagate FreeAgent GoFlex Drive - 3TB which use to work fine before on .38 but now is broken. Drive works fine when connected directly to a computer but when attached to the router, and accessed via \\readyshare, it spins and spins until the router either restarts. Can this be fixed back to the way it was in the next version.
Apprentice
Posts: 998
Registered: ‎2011-06-12

Re: WNDR3800 Firmware Update v1.0.0.44

To be fair, after my experiences with the DGND3700, I wouldn't recommend either routers for hosting a drive on a permanent basis.

I have a pair of Netgear ReadyNAS unit and having set them up, they are far better at supporting both DLNA and FTP services.

I appreciate the cost differences. I found that each time a router reboots, it has to rescan the hard drive in order to rebuild the DLNA database. With large drives this process can literally take hours. With a proper ReadyNAS a reboot doesn't take anything near as long.

You can also set up specific accounts for accessing the NAS via FTP. This is truly essential if you wish to provide access for a friend or relative as you can decide just how much access to provide (i.e. read only, exclude some folders).

The newest units can house drives up to 4TB too, although these are more than double the cost of the 3TB drives.
Novice
Posts: 0
Registered: ‎2013-04-23

Re: WNDR3800 Firmware Update v1.0.0.44

Just downloaded this firmware update, and now I cannot see the 5g network as an option on various devices. The ones that had already been connected still show 5g as an option and connect. New devices do not show 5g as an option, just 2.4. Should I do a rollback? Or did I set it up incorrectly. Thanks, Laura:confused:
Apprentice
Posts: 998
Registered: ‎2011-06-12

Re: WNDR3800 Firmware Update v1.0.0.44

Hello Laura and welcome to the forum.

Without knowing anything about the devices which are not seeing the router's 5GHz signal it would be foolish to say if all was well or not.

Not every WiFi device has access to the 5GHz channels. To determine if they should or not you should check their technical specifications and see if the WiFi adaptor supports WiFi a.

If they do, then try changing the channel to 36 or 44. Both these channels should be found by most 5GHz WiFi adaptors.
Aspirant
Posts: 20
Registered: ‎2010-02-27

Re: WNDR3800 Firmware Update v1.0.0.44

I was running .24 version and there were DFS channel... now with .44 they are disappeared!!! Why?? :confused::confused:
Discussion Stats
  • 22 replies
  • 32423 views
  • 0 kudos
  • 12 in conversation
Top Contributors