Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
100,000 results
Sorted by:
2023-11-22
05:13 AM
After the latest updates with chrome, The certificate is not secure and I get this: This site can’t be reached The webpage at https://192.168.x.x/ might be temporarily down or it ...
Show results in replies (8)
-
Here is the solution I found: We found a fix. Delete the user's local state file located i...
-
Have same problem on Mac OS 14.3.1 (23D60) latest Chrome Chrome is up to date Versio...
-
@schumaku wrote: The --force.... is a parameter to be passed to Chromw on start-up from the...
-
chrome --force-fieldtrials=RSAKeyUsageForLocalAnchors/DisabledLaunch does not work in my pc, ...
-
Perhaps I am not doing it correctly. Windows 11 Pro. trying to open https://orbilogin.net or ...
-
Heya @CrimpOn Looks like you are mixing several different issues and models. ...
-
@JBX_Industries I am not sure. The only I know is that my particular model is now listed as "E...
-
I am having the same issue with a customers router as well. I have tried accessing the management i...
2023-11-28
02:45 AM
I have just got Starlink and can connect wirelessly to it fine. I can put it in bypass mode, plug a 2m ethernet cable into the adaptor and connect this to my Netgear 4 - Stream AX1800 WiFi 6 Router, ...
Show results in replies (7)
-
SOLVED! I put a switch in between the Starlink ethernet adapter and the cat cable which runs up to ...
-
Sorry, I can confirm, the cable is cat5e
-
Some say there is a ethernet adapter that comes from the ISP that maybe needed and or use of a non ...
-
@J27 wrote: Someone elsewhere suggested it could be an IP issue, but I’m not sure? Thanks ...
-
Thanks for your quick reply. Re your first question, the “it” in bypass mode is the Starlink rou...
-
@J27 wrote: Re your 2nd question, the adapter is the Starlink ethernet adapter you can purc...
-
@J27 wrote: I have just got Starlink and can connect wirelessly to it fine. I can put it in b...
2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System
ht...
Show results in replies (9)
-
Followed the directions and upgraded. Did the RBS750 units first and then the RBR750. &...
-
IoT addresses a long-standing customer issue: the ability to create a WiFi SSID that broadcasts onl...
-
What is Supports IoT network? Is this a new feature or capability? How does it work? Would I need t...
-
Watching this thread for updates on performance before I upgrade.
-
What is Improves the stability of connections between router and satellites? Did the backhaul conne...
-
Want to update to 7.2.6.21 but have a few questions: 1) Does this firmware update solve th...
-
@FURRYe38 wrote: Why it was in beta since January. Because I have had to use all s...
-
Having real problems, I cannot updare the Firmware on Satellite at all. Just wont accept the file, ...
-
There are ways to handle that. This just seems like a quick and dirty way to be able to have a netw...
2023-11-06
05:54 PM
Hello, Recently we were told by our ISP (Spectrum) that our Internet speed has increased from 100MB to 300MB. Not only did this not happen, but our upload speeds are now nonexistent when connected v...
Show results in replies (8)
-
Thanks FurryE38. Well I have an update! Spectrum came out and replaced the line due to errors they...
-
What "single switch in the control panel did you punch? Thx. "There's literally a si...
-
Hi swingtime! I actually answered your question- see the reply right above your most recent post.
-
I do not see a "Prioritization Engine" switch of any sort on my netgear http://192.168.0.1/&nb...
-
I believe this "Prioritization Engine" feature is located on the Killer adapter cards control ...
-
👍🍻
-
Thanks FURRYe38. I hope we don't have to replace it - that would be immensely frustrating as the wh...
-
I highly recommend next time, of you do have to get something different, go with separate modem and...
2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System htt...
Show results in replies (9)
-
Update went smooth, no issues so far.
-
Totally "MY BAD". Yes, the IoT network shows as disabled
-
Manual updating of Orbi 853 (two satellites, then router) went smoothly. Looks good under router ad...
-
Is there a documentation what this exactly means: Supports IoT network. Is it "only" cr...
-
Hi, The update went without problems and everything seems to work. I'm having a curious ...
-
Lets try this, FR the RBS then turn it OFF. Use the RBRs web page and go into Basic tab/Con...
-
I updated my RBK853 to the 7.2.6.21 firmware manually. Updated from 4.6.14.3. Update went smoothly,...
-
All good so far. No issues at all with the upgrade. I'm glad Netgear decided to take this ...
-
Sometimes a soft reboot doesn't work well or is not enough. Powering OFF the RBR for 1 minute then ...
2024-02-13
09:30 PM
I recently upgraded to a Samsung S24 Ultra. Was surprised to see a Wifi 7 icon when I had setup my phone at home with my Orbi RBE 970s. However it felt like it was slower. I still have my old phon...
Show results in replies (6)
-
It should. It could be simply rebooting the wireless allowed it to switch to the 6ghz. Some...
-
A couple points to make. 1. you don't say (and the settings don't show) if you're connectin...
-
@Sagnew wrote: Re : 5ghz vs 6ghz signals. The Wifi 7 connection is a via a 5ghz channel.--...
-
yes you're connecting to the 5ghz band and at 80hz. Not sure why its connecting at 80hz unl...
-
Did you try swapping to a different 5ghz channel? And not sure what you mean by "more typic...
-
I am jumping around a bit .... I was playing around with the settings I noticed the "Advan...
2023-08-19
02:48 AM
My router is randomly and intermittently turning off it's wired and WiFi connections, which means every device connected loses it's connection. It occurred several times yesterday and sometimes occu...
Show results in replies (8)
-
The modem is a tp link TD-W9970 in bridge mode, but it has been 100% stable since I setup the ...
-
I guess I thought that as the SkyQ hub supports ipv6 then I should try to turn it on with the RAX70...
-
@cuke2u wrote: I guess I thought that as the SkyQ hub supports ipv6 then I should try to tu...
-
As I have SkyQ and Sky broadband then they supplied the hub but I decided to replace the hub as I h...
-
@schumaku wrote: Beyond, a not so fun fact is that the RAX70 WAN port does run on Fast Ethe...
-
@cuke2u wrote: Thanks, the router has firmware version 1.0.14.134 and it's connected to a mo...
-
@cuke2u wrote: As I have SkyQ and Sky broadband then they supplied the hub but I decided to...
-
@cuke2u wrote: The modem is a tp link TD-W9970 in bridge mode, but it has been 100% sta...
2024-02-26
09:07 AM
2 Kudos
Hi I currently have a ReadyNAS 214 device which after updating to firmware version 6.10.10, no longer allows me to install or update apps via the admin page as Netgear have now disable...
Show results in replies (9)
-
@Rickjones80 wrote: I currently have a ReadyNAS 214 device which after updating to...
-
Netgear has clearly already left the NAS market. Given that the Linux version on which the OS...
-
@XrayDoc88 wrote: How can you even downgrade now that the upload option is gone? ...
-
I can't believe this firmware update change! I have invested in two Netgear RN628X NAS device...
-
Thank you, I have kept a copy of the Plex deb file and I have now amended my apt sources list which...
-
Great information StevenB. Thanks for your help. I hope you can bear with me a little b...
-
@XrayDoc88 wrote: 1. I thought the PLEX metadata libraries were stored and a...
-
@XrayDoc88 wrote: @StephenB wrote: In my case, the metadata libraries are ...
-
@XrayDoc88 wrote: I still think I'll try to migrate my server to a Windows PC, but I'd down...
2024-03-03
06:50 AM
...oots. Key usage is already required for ECDSA certificates, and for publicly trusted certificates. Enterprises can test and temporarily disable key usage enforcement using the R...
Show results in replies (7)
-
SXR80/SXS80: here SRR30/SXS30: here
-
Trying to enter the menu of the Orbi-Pro-router using Edge or Chrome can lead to the message: &nbs...
-
Hello @100won, And welcome to the NETGEAR Community! 🙂 This is already an on...
-
Hi, I tested in my laptop before posting here. I usually use edge and chrome browser.
-
So navigating to HKEY_LOCAL_MACHINE\SOFTWARE\Policies in regedit on my Windows11 23h2 machine ...
-
Hi @ReneD ! If there is a patch firmware for this issue I'm also in need for it. Can ...
-
Is there also a patch for the SRS60?
2023-08-11
10:34 AM
Hi I have a P8000 and I’m trying to turn on IPv6 to run an Xbox series x. Is there a way to turn this on? The version I have is V1.4.4.94. My ISP is Hotwire communications. I have very little technic...
Show results in replies (8)
-
Tech was here made a bunch of calls and determined IPV6 isn’t available yet. “It’s something we’re ...
-
@LeadPipe wrote: Hi I have a P8000 and I’m trying to turn on IPv6 to run an Xbox series x. I...
-
@Kitsap is spot on with the general advice, but be warned that IPv6 comes in various flavours and n...
-
@LeadPipe wrote: I have a call into my ISP the agent that I talked to “thought” it was suppo...
-
It’s a Nokia model XS-250X-A thanks
-
In line pix are visible for me. Can @Kitsap see them now?
-
@michaelkenward wrote: In line pix are visible for me. Can @Kitsap see them now? ...
-
Also, would using a switch work? I can connect the switch to the ONT and then connect the Xbox and ...