Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
100,000 results
Sorted by:
‎2023-11-22
05:13 AM
After the latest updates with chrome, The certificate is not secure and I get this: This site can’t be reached The webpage at https://192.168.x.x/ might be temporarily down or it ...
Show results in replies (9)
-
Here is the solution I found: We found a fix. Delete the user's local state file located i...
-
Hi @James_MA, Try using Firefox to update Firmware (Online update) and a factory reset i...
-
Will Netgear ever fix that sill certificate error?
-
Not a refernence, however using the ubiqutous Chrome Version 121.0.6167.161 (Offizieller Build...
-
OS: Windows 11 Pro 23H2 Browser: Chrome Version 121.0.6167.161 (Official Build) (64-bi...
-
@James_MA wrote: chrome --force-fieldtrials=RSAKeyUsageForLocalAnchors/DisabledLaunch ...
-
@Architekt Thank you so much for you reply. This allowed me in. So are we waiting for a firmwa...
-
@JBX_Industries If you have the exact same model as mine, it seems like there's a signed ...
-
It looks like we have the same router type. @Architekt is the most recent downloadable v...
I am receiving a notification message that reads, "Guest Wifi Test deep link". Does anyone know what this means?
Show results in replies (9)
-
https://status.netgear.com/orbi 7th July 2023 Multiple Push Notifications...
-
I have the same exact notification--multiples of it. Would love to know what's up.
-
Hundreds of people are getting this Guest wifi Test Deep Link notification. What the heck is going ...
-
My guess is someone on their Orbi app team is testing in production and they don't know it.  ...
-
Same here. Five alerts today all the same. Never happened before.
-
I’m also experiencing this, at what would appear to be the exact same time you are. I was a bit ...
-
I'm getting these messages popping up on my iPhone. Anyone know why these started to appear? I wasn...
-
I’m getting this as well despite my Guest network being deactivated…
-
My Orbi app just send me 3 strange and unexpected push alerts. I'm concerned. I don't know what thi...
‎2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System
ht...
Show results in replies (8)
-
Followed the directions and upgraded. Did the RBS750 units first and then the RBR750. &...
-
Yes. Since we cant set static addressing on the RBS themselves.
-
I had not experienced random LEDs on my 7 series on v4 FW versions. Nobody mentioned in in ...
-
Be 100% certain you are using the correct file for your Satellites. The file should have a this nam...
-
Got it. Do the sats need to be in the IP address range of 192.168.x.100-200 as well?
-
The error note sounds like you are using an incorrect version of the update files. So you unzipped ...
-
I didn't have any issues with the update the only thing I did was cycle power to my satellite after...
-
These are the files I have used. I re-downloaded them just to check, and no difference. &nbs...
‎2024-02-07
04:13 PM
10 Kudos
I just manually updated to firmware version v1.1.4.28 on my Netgear RAX 43v2 router. After the update I can access my router through the Netgear app but am unable to get to the UI through the i...
Show results in replies (9)
-
No, only answer seems to be do a factory reset. Seems to be a firmware issue since across multiple ...
-
Well today I had the day off with nothing to do, so I figured I'd waste a couple hours of my life a...
-
Used correct IP address shown in app and it takes me to the page with the error message
-
It is the default IP address for Netgear devices showing up on App
-
Used correct IP shown in app. It is the default IP for Netgear
-
Well ill be damned. Did the factory reset and setup from scratch and now it works. What good is a b...
-
Any HELP on this?
-
Maybe make a new back up now?
-
FYI: https://community.netgear.com/t5/Nighthawk-with-WiFi-6-AX-and/New-RAX41-42-43-50-54-V2-Firmw...
‎2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System htt...
Show results in replies (8)
-
Update went smooth, no issues so far.
-
Has a power off for 1 minute then back ON with the ISP modem and router been performed since last u...
-
I recently had an issue where my RBS850 satellite didn't seem to have any devices connected to it. ...
-
@Lewes1973 wrote: Is there a documentation what this exactly means: Supports I...
-
Updated both satellites (RBS850) and the Router (RBR850).... everything went really smooth (backed ...
-
Good to hear. Be sure to save off a back up configuration to file for safe keeping. Saves time if a...
-
Update went smooth, I’m using only Rbr850. Despite I had only thin brick walls my iPad was constan...
-
Update went smooth but after 2 days had to shut down satellite because it won't let clients get an ...
‎2023-11-06
05:54 PM
Hello, Recently we were told by our ISP (Spectrum) that our Internet speed has increased from 100MB to 300MB. Not only did this not happen, but our upload speeds are now nonexistent when connected v...
Show results in replies (9)
-
Thanks FurryE38. Well I have an update! Spectrum came out and replaced the line due to errors they...
-
Tim and Marilyn: What is the "single switch in my control panel to fix slow speeds for a NetG...
-
Hi swingtime! It is the "Prioritization Engine" - literally just turn it off and the issue is resol...
-
Thanks Furry 38. I do not have the Killer Ethernet Card. Only have the Netgear AC1900 C...
-
Glad ISP helped on there side. Ya Killer adapters have been historically one cause of po...
-
Thanks again Furrye38, and thanks again for this (and the earlier) helpful links!
-
Well...the plot thickens. I talked to a Spectrum tech a few weeks ago who insisted they were pushi...
-
Any Criticals, Errors or Warnings seen in the event logs needs to be reviewed and resolved by the I...
-
Let us know how it goes.
‎2023-09-26
10:05 AM
Hi; I have the R8000P (AC4000) and about two weeks ago noticed my WiFI speed dropped precipitously from between 300-400Mbps to about 150Mbps. I am on a fiber gigabit plan through my ISP provider.&nbs...
Show results in replies (9)
-
Yes, or 192.168.1.1 or the routers IP address you may have configured on it. There is a FW update s...
-
@DesertRat66 wrote: 2) I got into my ISP modem router settings and disabled the WiFi hoping t...
-
Thanks again; to answer your question, yes, I have performed the steps you describe here - powering...
-
@DesertRat66 wrote: Performed the same speed test on multiple devices and consistently pulled...
-
Thanks, and yes, I understand that. If you notice in my post I tried to point out that prior to the...
-
The Zyxel is a modem/router provided by CenturyLink and is fed by a fiber line running into the hom...
-
Wireless speeds will not see anything around 900mbps on 5Ghz AC. Depending on wifi design and suppo...
-
So today I had hoped to resolve the bottleneck by doing two things. 1). Installed latest firmware a...
-
@DesertRat66 wrote: I DO have the Netgear router connected to this modem. It’s actually a sur...
‎2023-08-19
02:48 AM
My router is randomly and intermittently turning off it's wired and WiFi connections, which means every device connected loses it's connection. It occurred several times yesterday and sometimes occu...
Show results in replies (9)
-
The modem is a tp link TD-W9970 in bridge mode, but it has been 100% stable since I setup the ...
-
@cuke2u wrote: Well I had another random router reboot yesterday afternoon after setting ip...
-
Indeed it does so I'll set it to that and give it a whirl, not sure though if the RAX70 supports th...
-
@cuke2u wrote: Indeed it does so I'll set it to that and give it a whirl, not sure though i...
-
So far no disconnects 🙂 Yes my isp does support ipv6 and I've been looking at a way of implementi...
-
@cuke2u wrote: I thought I'd found some settings that would work, as posted in the...
-
@cuke2u wrote: Thanks, the router has firmware version 1.0.14.134 and it's connected to a m...
-
@cuke2u wrote: The modem is a tp link TD-W9970 in bridge mode, but it has been 100% st...
-
Well I had another random router reboot yesterday afternoon after setting ipv6 to auto so I've disa...
‎2024-02-26
09:07 AM
2 Kudos
Hi I currently have a ReadyNAS 214 device which after updating to firmware version 6.10.10, no longer allows me to install or update apps via the admin page as Netgear have now disable...
Show results in replies (8)
-
@Rickjones80 wrote: I currently have a ReadyNAS 214 device which after updating to...
-
I'm SO glad I didn't just auto-update. I saw the mention of the "Apps" change in the release notes ...
-
Thank you StevenB. I've only ever updated the firmware by simply clicking ok. I didn't ...
-
@XrayDoc88 wrote: 1. Did firmware 6.10.9 even apply to the RN628X? My NAS we...
-
@StephenB wrote: In my case, the metadata libraries are on the PC, and the transcoding...
-
I just had this same issue after an auto update. I only run PLEX app and when the new update came o...
-
Netgear has clearly already left the NAS market. Given that the Linux version on which the OS...
-
So all you did was downgrade the firmware and you were able to upload the new ReadyNAS PLEX server?...
‎2023-12-05
06:41 AM
Bug Fixes: 11/21/2023
Fixes the issue where default time zone is in wrong setting when internet access is not available.
Fixes the issue where offline client devices will show on current c...
Show results in replies (8)
-
Known Issues: For users seeing a Access Denied message after the FW is loaded and processed by th...
-
You shoulsd be on the new firmware since it resolves security issues. What worked for me was ...
-
I updated the firmware today (10Feb24) and I can no longer log into the router from any of my compu...
-
I found if you disconnect the modem you can login with no internet connection. Then sim...
-
For users seeing a Access Denied message after the FW is loaded and processed by the router, users ...
-
@1modulator wrote: I found if you disconnect the modem you can login with no in...
-
Thanks for the information, as soon as I can do what is indicated to update it to the latest versio...
-
Added to the initial post. Thank you.