Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
100,000 results
Sorted by:
2023-12-05
06:41 AM
Bug Fixes: 11/21/2023
Fixes the issue where default time zone is in wrong setting when internet access is not available.
Fixes the issue where offline client devices will show on current c...
Show results in replies (8)
-
Known Issues: For users seeing a Access Denied message after the FW is loaded and processed by th...
-
I updated the firmware today (10Feb24) and I can no longer log into the router from any of my compu...
-
I found if you disconnect the modem you can login with no internet connection. Then sim...
-
For users seeing a Access Denied message after the FW is loaded and processed by the router, users ...
-
@1modulator wrote: I found if you disconnect the modem you can login with no in...
-
You shoulsd be on the new firmware since it resolves security issues. What worked for me was ...
-
Thanks for the information, as soon as I can do what is indicated to update it to the latest versio...
-
Added to the initial post. Thank you.
2023-10-09
05:57 AM
As the title states, my router is constantly crashing. First the GUI fails and then shortly there after, the whole of the router fails. I have to manually restart the router for it ...
Show results in replies (9)
-
Probably best to return it. Good Luck.
-
I have my router sitting on large wire mesh shelving, so it has full open air. I wonder if I ...
-
https://www.amazon.com/NETGEAR-Nighthawk-Smart-Wi-Fi-Router/dp/B00KWHMR6G - This router is what I w...
-
I ended up buying a ASUS ROG Rapture GT-AX6000, I have had good product support from them in the pa...
-
Let us know what you get...
-
That was a good modem too when it was supported by my ISP. It got booted though. Y...
-
Is this common a common problem for this router or this vendor? I have seen that other router...
-
What are your thoughts on this? Hardware failure?
-
No. Maybe a Mfrg defect or part that went bad. Not all routers are bad. Just maybe one bad go thru ...
2023-07-16
05:30 PM
Hi! I received an alert my volume was degraded (Disk #2). It then told me: Detected increasing reallocated sector count: [606] on disk 2 (Internal) [WDC WD60EFRX-68L0BN1 WD-WX21D5533R6R] 32 times in...
Labels:
Show results in replies (8)
-
@ummjay wrote: thanks @StephenB and @MikeD1234 . So now I've backed up ...
-
@Sandshark been a while since I worked on RN units. But, yes, that's what I meant, if he was...
-
thanks @StephenB and @MikeD1234 . So now I've backed up the data from my 6TB to...
-
Hi @MikeD1234 and @StephenB , I've sent you a private message with my log files...
-
@Sandshark yes, I believe that's the issue. Adjusted my comment, I meant to type RAID1 not 5...
-
Thanks for your response. Yes i'm on XRAID, No I don't have a backup of the data. I was hoping my 2...
-
@MikeD1234 If he was using RAID0, the loss of a drive would not have caused the volume t...
-
thanks everyone. So I'm expecting my new 10tb drive to arrive this Thursday. What I am thinking of ...
2023-07-29
08:16 PM
When I login to armor security on Android i get a 403 error on cloudfront but iphone app is working fine. Please fix your app!
Show results in replies (8)
-
Fixed! I can login now 😄 Samsung Fold 5
-
-
Same issue here. I've just received a new phone and am unable to login and activate Bitdefender thr...
-
Shake feature is not in android devices
-
Yes, fixed for multiple android devices 🎉🎉
-
On Sunday I was on the phone with Netgear Support, going through the troubleshooting and gathering ...
-
Having the same issues as well. Has anyone already found a solution for this? Otherwise it renders...
-
Just bought the new Samsung Fold 5 and I have the issue.
2024-02-24
01:46 PM
Something strange seems to have happened this morning. Yesterday my RBR50 and four RBS50 satellites were functioning just fine, and had been since late December when I added the last two satellites....
Show results in replies (8)
-
OK I'm back in business. I ended up doing the factory reset, but now I don't think that was actual...
-
👍
-
@CrimpOn wrote: @ICPete wrote: I'm much more convinced it was something that chan...
-
In that case I have to report my experience is different from what you describe. I can type in htt...
-
Thanks for the info.
-
@ICPete wrote: I just tried Incognito mode in Chrome, when once again I was able to log int...
-
Correct, Incognito mode allows me to connect WITH NO WARNINGS to the http://192.168.21.1 page ...
-
Interesting... That makes me think my situation is due to Bitdefender, my antivirus program. It h...
2023-05-26
01:50 PM
1 Kudo
I am trying to turn off Anywhere Access on my RAX50. My iPhone is connected to it by WiFi. In the Nighthawk app it tells me I must connect locally to turn Anywhere Access off. How do I connect loc...
Show results in replies (8)
-
Kitsap, unfortunately, the R9000 and the RAX50 are different. You probably saw the screenshots I po...
-
Attempting to configure, troubleshoot, or manage a router via an application on a mobile device is ...
-
I’ve tried to find Anywhere Access or Remote Management in routerlogin without the Nighthawk instal...
-
For the benefit of other users who may turn up here with a similar challenge, can you flag up which...
-
I have looked high and low to find the specific location of the setting for Anywhere Access on remo...
-
@cyberbiker wrote: Kitsap, unfortunately, the R9000 and the RAX50 are different. You probably...
-
Have you even been able to find the setting for Anywhere Access on routerlogin.net? When I open ...
-
@Tobybishop wrote: Connect your computer or device to your router's network. O...
2024-02-13
09:30 PM
I recently upgraded to a Samsung S24 Ultra. Was surprised to see a Wifi 7 icon when I had setup my phone at home with my Orbi RBE 970s. However it felt like it was slower. I still have my old phon...
Show results in replies (6)
-
It should. It could be simply rebooting the wireless allowed it to switch to the 6ghz. Some...
-
A couple points to make. 1. you don't say (and the settings don't show) if you're connectin...
-
@Sagnew wrote: Re : 5ghz vs 6ghz signals. The Wifi 7 connection is a via a 5ghz channel.--...
-
yes you're connecting to the 5ghz band and at 80hz. Not sure why its connecting at 80hz unl...
-
Did you try swapping to a different 5ghz channel? And not sure what you mean by "more typic...
-
I am jumping around a bit .... I was playing around with the settings I noticed the "Advan...
2023-08-11
10:34 AM
Hi I have a P8000 and I’m trying to turn on IPv6 to run an Xbox series x. Is there a way to turn this on? The version I have is V1.4.4.94. My ISP is Hotwire communications. I have very little technic...
Show results in replies (8)
-
Tech was here made a bunch of calls and determined IPV6 isn’t available yet. “It’s something we’re ...
-
@LeadPipe wrote: Hi I have a P8000 and I’m trying to turn on IPv6 to run an Xbox series x. I...
-
@Kitsap is spot on with the general advice, but be warned that IPv6 comes in various flavours and n...
-
@LeadPipe wrote: I have a call into my ISP the agent that I talked to “thought” it was suppo...
-
It’s a Nokia model XS-250X-A thanks
-
The tech who hooked up the system told me that only one of the ports on the ONT worked. I confirmed...
-
In line pix are visible for me. Can @Kitsap see them now?
-
@michaelkenward wrote: In line pix are visible for me. Can @Kitsap see them now? ...
2023-09-10
01:38 AM
I have a Netgear Nighthawk CAX30S that I am beginning to configure. In the Attached Devices section, I see a wired device that automatically was assigned an IP address of 192.168.1.2 before I e...
Show results in replies (8)
-
For what it’s worth, I worked out the source of my trouble: an addled brain…. A large part of my co...
-
"STATIC IP ADDRESSES...reside OUTSITE of a host routers default DHCP IP address pool." ...
-
...een reports here of this. We have to deal instead with issues with Public/Private networks.
-
Always good to learn. Enjoy now.
-
I will try to address your questions in sequence. You write, "What else is connected to the r...
-
@ecolucci wrote: There must be a way for me to assign static IPs to certain devices and hav...
-
I don’t think we are communicating. I am not sure what you are getting at when you refer to my use ...
-
Sorry michaelkenward and FURRYe38, I did not see either of your messages until after I posted my 20...
2023-10-18
02:19 PM
Hi All, I recently upgraded my Xfinity service to 800 Mbps which forced me to replace a decade old modem that wasn't up to the task. I opted for the Xfinity approved Netgear CM1000v2 m...
Show results in replies (8)
-
After "bending" the network in several different directions, I found a solution to most all issues....
-
@Shubox56 wrote: Hi All, I recently upgraded my Xfinity service to 800 Mbps which f...
-
Thanks to all! Lots of good suggestions. Hardwiring the entire house isn...
-
@Shubox56 wrote: Just when I thought I had it all figured out, something else came to mind.&...
-
Thank you for the quick response. I'm a network neophyte with lots to learn. I'll take some time to...
-
@Shubox56 wrote: Thank you for the quick response. I'm a network neophyte with lots to learn...
-
That is specifically why the second Wi-Fi router is configured as a wired access point. The r...
-
"I think your mean RAX50 in your next to last sentence (typo?)." OOOPPPPS! Yes, RAX50. ...