Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
100,000 results
Sorted by:
2023-08-11
10:34 AM
Hi I have a P8000 and I’m trying to turn on IPv6 to run an Xbox series x. Is there a way to turn this on? The version I have is V1.4.4.94. My ISP is Hotwire communications. I have very little technic...
Show results in replies (8)
-
Tech was here made a bunch of calls and determined IPV6 isn’t available yet. “It’s something we’re ...
-
@LeadPipe wrote: Hi I have a P8000 and I’m trying to turn on IPv6 to run an Xbox series x. I...
-
@Kitsap is spot on with the general advice, but be warned that IPv6 comes in various flavours and n...
-
@LeadPipe wrote: I have a call into my ISP the agent that I talked to “thought” it was suppo...
-
It’s a Nokia model XS-250X-A thanks
-
The tech who hooked up the system told me that only one of the ports on the ONT worked. I confirmed...
-
In line pix are visible for me. Can @Kitsap see them now?
-
@michaelkenward wrote: In line pix are visible for me. Can @Kitsap see them now? ...
2024-02-26
09:07 AM
2 Kudos
Hi I currently have a ReadyNAS 214 device which after updating to firmware version 6.10.10, no longer allows me to install or update apps via the admin page as Netgear have now disable...
Show results in replies (9)
-
@Rickjones80 wrote: I currently have a ReadyNAS 214 device which after updating to...
-
I'm SO glad I didn't just auto-update. I saw the mention of the "Apps" change in the release notes ...
-
Netgear has clearly already left the NAS market. Given that the Linux version on which the OS...
-
I can't believe this firmware update change! I have invested in two Netgear RN628X NAS device...
-
Thank you, I have kept a copy of the Plex deb file and I have now amended my apt sources list which...
-
@XrayDoc88 wrote: How can you even downgrade now that the upload option is gone? ...
-
Thank you StevenB. I've only ever updated the firmware by simply clicking ok. I didn't ...
-
Great information StevenB. Thanks for your help. I hope you can bear with me a little b...
-
@XrayDoc88 wrote: 1. I thought the PLEX metadata libraries were stored and a...
2023-07-29
08:16 PM
When I login to armor security on Android i get a 403 error on cloudfront but iphone app is working fine. Please fix your app!
Show results in replies (9)
-
Fixed! I can login now 😄 Samsung Fold 5
-
-
Yes, fixed for multiple android devices 🎉🎉
-
On Sunday I was on the phone with Netgear Support, going through the troubleshooting and gathering ...
-
Having the same issues as well. Has anyone already found a solution for this? Otherwise it renders...
-
Just bought the new Samsung Fold 5 and I have the issue.
-
So basically I have paid for a year of Armor Security and then to the conclusion that it cannot be ...
-
Same issue here. I've just received a new phone and am unable to login and activate Bitdefender thr...
-
I have the same issue on my new Google Pixel
2023-12-05
06:41 AM
Bug Fixes: 11/21/2023
Fixes the issue where default time zone is in wrong setting when internet access is not available.
Fixes the issue where offline client devices will show on current c...
Show results in replies (8)
-
Known Issues: For users seeing a Access Denied message after the FW is loaded and processed by th...
-
I updated the firmware today (10Feb24) and I can no longer log into the router from any of my compu...
-
I found if you disconnect the modem you can login with no internet connection. Then sim...
-
For users seeing a Access Denied message after the FW is loaded and processed by the router, users ...
-
@1modulator wrote: I found if you disconnect the modem you can login with no in...
-
You shoulsd be on the new firmware since it resolves security issues. What worked for me was ...
-
Thanks for the information, as soon as I can do what is indicated to update it to the latest versio...
-
Added to the initial post. Thank you.
2023-10-09
05:57 AM
As the title states, my router is constantly crashing. First the GUI fails and then shortly there after, the whole of the router fails. I have to manually restart the router for it ...
Show results in replies (9)
-
Probably best to return it. Good Luck.
-
I have my router sitting on large wire mesh shelving, so it has full open air. I wonder if I ...
-
https://www.amazon.com/NETGEAR-Nighthawk-Smart-Wi-Fi-Router/dp/B00KWHMR6G - This router is what I w...
-
I ended up buying a ASUS ROG Rapture GT-AX6000, I have had good product support from them in the pa...
-
Let us know what you get...
-
That was a good modem too when it was supported by my ISP. It got booted though. Y...
-
Is this common a common problem for this router or this vendor? I have seen that other router...
-
What are your thoughts on this? Hardware failure?
-
No. Maybe a Mfrg defect or part that went bad. Not all routers are bad. Just maybe one bad go thru ...
2024-04-13
06:55 PM
Hi, fellow Orbians! I had an older Orbi system (AX4200) and was gifted this RBR850 (AX6000) kit. It was fully installed and going about our business until I wanted to source parts to build a...
Show results in replies (9)
-
Need the cable connections data page as well. Please repost a event log too as to ...
-
Has a factory reset and setup from scratch been performed since last FW update? A complete pul...
-
Thank you for your reply! I loaded the updated firmware last night thinking that w...
-
Try a different browser and device as well to test that web site.
-
Oh it's across multiple devices and browsers. I mentioned to my wife that there was a strange netwo...
-
...dgesuite.net, the Akamai Technologies content delivery network (CDN) blocking the public IP address y...
-
Well, I thought I had fixed it with the MAC address error since Home Depot was accessible again, ho...
-
If you turn off the CM modem and RBR, then disconnect the RBR from the CM modem, connect up this on...
-
OK, something really strange is going on. I did exactly what you told me to, the steps, in...
2024-03-03
06:50 AM
...oots. Key usage is already required for ECDSA certificates, and for publicly trusted certificates. Enterprises can test and temporarily disable key usage enforcement using the R...
Show results in replies (6)
-
SXR80/SXS80: here SRR30/SXS30: here
-
Trying to enter the menu of the Orbi-Pro-router using Edge or Chrome can lead to the message: &nbs...
-
Hi, I tested in my laptop before posting here. I usually use edge and chrome browser.
-
So navigating to HKEY_LOCAL_MACHINE\SOFTWARE\Policies in regedit on my Windows11 23h2 machine ...
-
Hello @100won, And welcome to the NETGEAR Community! 🙂 This is already an on...
-
Hi @ReneD ! If there is a patch firmware for this issue I'm also in need for it. Can ...
2023-07-16
05:30 PM
Hi! I received an alert my volume was degraded (Disk #2). It then told me: Detected increasing reallocated sector count: [606] on disk 2 (Internal) [WDC WD60EFRX-68L0BN1 WD-WX21D5533R6R] 32 times in...
Labels:
Show results in replies (9)
-
@ummjay wrote: thanks @StephenB and @MikeD1234 . So now I've backed up ...
-
Hi! Meaning, the 6TB is not enough as a backup because it was prev used in the NAS? What do you sug...
-
"Just to be clear, I am assuming that you connected the 10 TB drive to a PC (windows or mac), and b...
-
If the sync is successful, then (b) remove the 6 TB drive. Hot-insert the other 10 TB drive ...
-
@Sandshark been a while since I worked on RN units. But, yes, that's what I meant, if he was...
-
Hey @ummjay, Sent you a reply in DM 😁. Mike
-
That is, of course, exactly as it is supposed to work. But things can go wrong during a sync,...
-
@MikeD1234 wrote: Hey @ummjay, Sent you a reply in DM 😁. Mike as did I ...
-
Your plan of just adding a new 10TB is very risky given that you already suspect both old drives of...
2024-04-12
02:26 PM
This has been driving me crazy. When I move my phone or macs from one room to another, my devices do not have the ability to reconnect to Wi-fi. I see the network but it just spins until ...
Show results in replies (8)
-
I would factory reset the RBS, Remove it from the RBRs web page. Then with the RBS in same room as ...
-
There a model# of this modem please... If you think there is one specific RBS that maybe...
-
The problem also seems to be room/satellite specific. Could it help to remove the satellite a...
-
Id swap RBS around first to see if problem remains in that one room/RBS location.
-
Has a power off for 1 minute then back ON with the ISP modem and router been performed since last u...
-
If it follows the satellite, then what should I do?
-
What Firmware version is currently loaded? V7.2.6.31_5.0.24 What is the Mfr and model# of the...
-
👍
2023-05-26
01:50 PM
1 Kudo
I am trying to turn off Anywhere Access on my RAX50. My iPhone is connected to it by WiFi. In the Nighthawk app it tells me I must connect locally to turn Anywhere Access off. How do I connect loc...
Show results in replies (9)
-
Kitsap, unfortunately, the R9000 and the RAX50 are different. You probably saw the screenshots I po...
-
@Tobybishop wrote: Connect your computer or device to your router's network. O...
-
Connect your computer or device to your router's network. Open a web browser and enter "r...
-
@cyberbiker wrote: << why="" are="" you="" trying="" to="" disable="" anywhere=...
-
@Kitsap wrote: The differences you are coming up with are most likely due to you using...
-
On the phone, you might need to turn off the cell data connection so the only connection is through...
-
@cyberbiker wrote: I’ve tried to find Anywhere Access or Remote Management in routerlogin wit...
-
tried both but no joy. Thanks for the suggestion though. I found an article in Netgear support -...
-
The question in the original post, Is there a way to turn Anywhere Access off using routerlogin.net...